1. DL manuals
  2. Ken A Vision
  3. Projector
  4. FlexCam 910-171-120
  5. Installation & Operation Manual

Ken A Vision FlexCam 910-171-120 Installation & Operation Manual

Other manuals for FlexCam 910-171-120: Product Catalog
Manual is about: Ken A Vision X2000: Product Brochure

Summary of FlexCam 910-171-120

  • Page 1

    Flexcam by ken-a-vision ® camera series installation & operation manual 910-171-120 910-171-125 910-171-150 operating and storage conditions do not store or operate the camera under the following conditions: • outdoors or connected to outdoor or auxiliary power sources. • at temperatures above 104°f...

  • Page 2

    9 camera care handling the camera • all flexcam by ken-a-vision ® cameras are for indoor use only. • use only a ken-a-vision power supply and a wall-mounted, electrical outlet. • do not use the cameras next to food or beverages. Cameras have been tested and approved for use in chemistry labs. Howeve...

  • Page 3

    8 using the studentcam ® and idcam™ the studentcam and idcam each have a three-button keypad for brightness and flicker control. Using the camera button function press and hold this button to increase image brightness. Press and hold this button to decrease image brightness. Press this button to eli...

  • Page 4

    7 using the teachcam ® about the illumaslides five illumaslides are included with the teachcam. Remove the cover on the slide and add various specimens, such as drops of pond water, for viewing. To use the illumaslides, attach the camera bracket to the bottom of the gooseneck. Place the camera head ...

  • Page 5

    6 using the camera general usage turning on the camera turn on your camera with the on/off switch located at the base of the gooseneck. Positioning the camera the camera head is swivel mounted. Do not turn it past the natural resistance. Adjust the flexible gooseneck (maximum 90 degrees) until the c...

  • Page 6

    5 making connections the teachcam, studentcam, and idcam connect to video display devices (tv, vcr, projector, computer, etc.) using the 6’ cable (25’ included with select models) with s-video and audio connectors on both ends. To connect camera to a tv, vcr, or projector 1. Connect the s-video and ...