1. DL manuals
  2. Ken A Vision
  3. Digital Camera
  4. M2013
  5. User Manual

Ken A Vision M2013 User Manual

Manual is about: MEye Digital Camera

Summary of M2013

  • Page 1

    Viii. Hardware specification the following gives information on the technical and hardware specifications of your ken-a-vision m eye. Please note that the information mentioned here may not be exactly the same with your ken-a-vision m eye. Camera as specification is subject to change without notice....

  • Page 2: Contents

    Contents i. Parts of ken-a-vision m eye camera………………………… p.3 ii. User interface description…… p.4 iii. Software installation ……………p.9 iv. Vision explorer ….………………p.12 v. Photo suite iii ….………………..P.14 vi. Video wave…………………… p.16 vii. Safety & faq …………………...P.18 viii. Hardware specification ………p.20 7...

  • Page 3: Vii. Safety & Faq

    Vii. Safety & faq this chapter provides some basic troubleshooting when you encounter problems installing or using the camera. It is important that you read first the previous chapters and the bundled software documentation before starting to find the problem. If this manual was not able to fix your...

  • Page 4

    Ii. User interface description 2.1 buttons there are 4 buttons on the camera power on/off button this button is used to turn on/off the camera while the camera is detached from a pc. Turning off the camera will switch to power saving mode and make the battery life longer. Note: while attached to pc,...

  • Page 5

    Vi. Video wave iii 6.1 installing video wave a. Make sure the usb cable is not connected to your computer. Insert the cd into the cd rom of your computer. The software is self-loading. Note: the m eye driver must be installed to use the camera with your computer. . B. Continue to follow prompts and ...

  • Page 6

    When the operation mode button is pressed once, it toggles the mode of operation. When the camera is first turned on, it is in the default state which is single shot (high quality). Each time the operation mode button is pressed, the mode is toggled as depicted below: the lcd icons will display as b...

  • Page 7

    V. Photo suite iii 5.1 installing photo suite iii g. Make sure the usb cable is not connected to your computer. Insert the cd into the cd rom of your computer. The software is self- loading. Note: the m eye driver must be installed to use the camera with your computer. H. Continue to follow prompts ...

  • Page 8

    2.3 system requirements: 8 4.2 vision explorer software icons ken-a-vision drive photo suite video wave hardware win98, 2000, win me, xp same same cpu min. Mmx 166 same min. P-ii 266 main memory min. 32m same min. 64m space of hard drive 10m 80m 45m vga min. 2m, 800x600, over 16bit min. 2m, 800x600,...

  • Page 9

    Iv. Installing vision explorer 4.1 installing vision explorer software m. Make sure the usb cable is not connected to your computer. Insert the cd into the cd rom of your computer. Your computer may ask you to reboot to initiate the installation. The software is self- loading. N. Continue to follow ...

  • Page 10

    3.3 click install. (if direct x 8.1 or higher is installed in your computer already windows xp, the installation continues automatically). Your computer will restart after the installation of direct x. After restarting, continue the installation process without selecting direct x. 3.4 click to selec...