Ken A Vision SCGN06 User Manual
Multi-
Multi-
Charger
Charger
User’s Guide
SCGN06
USING YOUR MULTI-CHARGER continued
If your microscope is unplugged before the charge is complete, the LED channel will stay blinking red for 30
seconds. This indicates that the cordless microscope should be plugged back in to complete charging and will
resume at the same level as before unplugged. However, if unplugged longer than 30 seconds and prior to com-
pleting the charge to the cordless microscope, the multi-charger will reset the channel time and turns off the
charge current for that channel. The entire charge cycle will restart, and the charge level will indicate zero.
Learn more about the complete line of Ken-A-Vision
Cordless Microscopes at 1.800.334.8407 or visit our
web site at: www.ken-a-vision.com
Ken-A-Vision's uniquely designed microscopes
and stereoscope with patented light source
technology equivalent to a 20-watt bulb, provides
you with quality optical illumination.
It's no ordinary microscope -
It's a Ken-A-Vision Cordless Microscope!
Ken-A-Vision Cordless microscopes and the Multi
Charger - It's the ideal tool when lack of electrical
outlets are of concern.
Ken-A-Vision Manufacturing Co., Inc.
5615 Raytown Road Kansas City, MO 64133 USA
Tel. 816-353-4787 * Fax: 816-358-5072
Email:
info@ken-a-vision.com
* Web:
www.ken-a-vision.com
INFORMATION TO THE USER – Ken-A-Vision reserves the right to make design improvements and other changes in accordance with the latest technology. There is no
obligation to make changes in products already manufactured. ©2002 Ken-A-Vision Corporation. Use only Ken-A-Vision products with the Multi-Charger.
Ken-A-Vision is not responsible for any loss or damage that may occur from use with other non Ken-A-Vision products.
INS-SCM