Vision scope 2 stereo microscope instruction manual t-22xxx series t-26001 www.Ken-a-vision.Com.
- 1 - contents 1. Before use ...……………………………………………………2 2. Nomenclature ……………………………………………….…3 3. Assembly ..……………………………………………………..4 4. Operation 4-1 position the glass stage………….…………………………5 4-2 adjust the degree of tightness of the focusing arm…........…5 4-3 set the specimen slide…...……..…………...……………...
- 2 - 1 before use 1-1 notice 1) microscope should be stored in a dry and clean environment. Do not expose the microscope to the direct sunlight. Avoid high temperatures and violent vibration. 2) this microscope is a precision instrument. Handle with care. Avoid impact and abrupt movement during tra...
- 3 - 2 nomenclature eyepiece shield diopter adjustment ring handle eyepiece lock screw head illumination device focusing knob glass stage clip power base dimmer knob.
- 4 - 3 assembly eyepiece shield eyepiece head lock screw illumination device glass stage clip base.
- 5 - 4 operation 4-1 position the glass stage 1) place the microscope base on a flat, firm surface and position the frosted stage plate on the base. (figure 1) figure 1 4-2 adjust the degree of tightness of the focusing arm 1) check the coarse focus knob on either side of the main support. The coar...
- 6 - 4-5 adjust the interpupillary distance 1) adjust the two eyepieces along the direction of the arrow shown in figure 4 until eyepiece feels comfortable and a single image is seen. 2) use the left rheostat (dimmer knob) to adjust light intensity figure 4 of the bottom (transmitted) light. 3) use...
- 7 - 5 configuration chart 5-1 t-22xxx series configuration note: note: note: note: the items marked “О” are included; others are optional. 5-2 t-26001 series configuration note: note: note: note: the items marked “О” are included; others are optional. Product number t-22001 t-22011 t-22021 t-22041...
- 8 - 6 technical specifications 6-1 t-22xxx series optical specifications objective mag. Working distance (mm) eyepiece eyepieces (optional) sc6ep10 sc6ep15 sc6ep20 mag. Objective field mag. Objective field mag. Objective field 1x 100 10x 20 15x 15 20x 11 2x 20x 10 30x 7.5 40x 5 3x 30x 6.7 45x 5 t-...
- 9 - 6-3 configuration specifications of t-22xxx series model t-22001 t-22041 head objective magnification 1x 、3x 2x 、4x working distance 100mm observation angle 45° interpupillary distance adjustment linkage between left and right eyepiece tube range of single adjustment: 54-75mm diopter adjustmen...
- 10 - 7 trouble shooting . Trouble cause remedy 1.Double images interpupillary distance is not correct adjust the interpupillary distance diopter adjustment is not correct adjust the diopter left and right eyepieces are different magnifications. Mount eyepieces of the same magnification 2.Dirt appe...
Ken-a-vision mfg. Co., inc. 5615 raytown road, kansas city, mo 64133 usa phone : (816) 353 www.Ken - 11 - vision mfg. Co., inc. 5615 raytown road, kansas city, mo 64133 usa (816) 353-4787 fax: (816) 358-5072 www.Ken-a-vision.Com ins-sc6.1.
