1. DL manuals
  2. Küppersbusch
  3. Fryer
  4. EFS 304.0
  5. Instructions For Use And Installation Instructions

Küppersbusch EFS 304.0 Instructions For Use And Installation Instructions

Summary of EFS 304.0

  • Page 1

    Bedienungsanweisung mit montageanweisungen instructions for use and installation instructions instructions d’ utilisation et avis de montage gebruiksaanwijzing en montagehandleiding istruzioni di uso e di montaggio instrucciones de uso y de montaje bruksanvisning i monteringanvisningar instruções de...

  • Page 2

    For your information please read all information mentioned in this instruction booklet very care- fully as it contains important instructions regarding the safety, the installati- on, the usage and the maintenance of the appliance. The appliance is designed for domestic purposes only. The manufactur...

  • Page 3

    General overview of the appliance 1 heater control light 2 heating coil 3 temperature sensor 4 container 5 thermostat 6 operating pannel 7 mains power cable 8 reset-switch after safety shut-off 9 frying basket 10 cold zone safety instructions for use the appliance may only be used to prepare food fo...

  • Page 4

    Use of the fryer please take note of the safety instructions on page 9. Your fryer is equipped with a ,,cold zone“ which means that the temperatu- re beneath the heating coil does not exceed 80 °c.Crumbs that fall into the fat do not burn and the fat stays clean for longer. There will be no unhealth...

  • Page 5

    Guidelines for frying temperatures the ideal frying temperature is between 140 and 180 °c.If this temperature is exceeded the quality of the oil deteriorates. If the temperature is too low, the pores on the outside of the food do not close and the food absorbes too much fat. Food temperature time in...

  • Page 6

    Troubleshooting problem possible cause remedy power is turned on, no heat or insufficient heat a) external safety fuse is faulty b) safety temperature limiter activated c) low temperature selected d) appliance is faulty a) check safety fuse exchange it if necessary b) press safety temperature limite...