1. DL manuals
  2. Kuppersbusch
  3. Washer
  4. IW 1209.1W
  5. Instructions For Use Manual

Kuppersbusch IW 1209.1W Instructions For Use Manual

Summary of IW 1209.1W

  • Page 1

    132995140 instructions for use gebruiksaanwijzing notice d’utilisation important: read these instructions carefully and then store them in a safe place. Belangrijk: beslist lezen en bewaren. Important: lisez soigneusement cette notice et gardez-la. Integrated washing machine integreerbare wasmachine...

  • Page 2: Technical Data

    2 dear customer, please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (...

  • Page 3: Contents

    Programme charts 14 wash programmes 14 special programmes 15 cleaning and maintenance 16 after each wash 16 periodical cleaning 16 bodywork 16 detergent dispenser drawer 16 drain filter 16 water inlet filter 16 emergency emptying out 17 frost precautions 17 something not working? 18 troubleshooting ...

  • Page 4: Safety Instructions

    The safety of kÜppersbusch appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. General safety • repairs to the machine must be carried out only by qualified p...

  • Page 5: Discarding

    English 5 discarding tips for environmental protection packaging materials the materials marked with the symbol are recyclable. >pe=polyethylene >ps=polystyrene >pp=polypropylene this means that they can be recycled by disposing of them properly in appropriate collection containers. Machine use auth...

  • Page 6: Description of The Appliance

    Front view description of the appliance • programme and temperature setting using the programme selector. • energy saving programme for normally soiled cotton and synthetic items. • speed for the final spin can be reduced to 900- 700 or 500 rpm. • rinse hold can be added: the laundry is left immerse...

  • Page 7

    English 7 control panel 1 mains-on light this light comes on when the on/off button is pressed, and goes out when it is pressed again. 2 on/off button press this button to switch the machine on. Press it again to switch the machine off. Programme option buttons depending on the programme, different ...

  • Page 8

    8 to empty out water: • press the start/pause button: after emptying, the machine performs the spin cycle required for the type of wash selected; • select the spin speed and press the start/pause button; • select the drain programme to empty out the water without spinning. Warning! The programme sel...

  • Page 9

    English 13 programme selector dial the programme selector determines the type of washing cycle (e.G. Water level, drum movement, number of rinses) and the washing temperature according to the type of laundry. The selector is divided into 5 sectors: • cotton • synthetics • delicates • wool • special ...

  • Page 10: Preparing The Wash Cycle

    Sorting out and preparing the laundry • sort out the laundry according to type of fabrics and care labels (see “types of fabric and care labels”). • empty pockets. • remove any metal parts (safety pins, clips, etc.). • to prevent the laundry from getting damaged and forming bundles, it is advisable ...

  • Page 11: Detergents and Additives

    English which detergent and additive? Use only detergents and additives for washing machines. Follow the manufacturer’s instructions. How much detergent? The quantity depends on: • the load: if the manufacturer does not provide any indications on the amount of detergent for small loads, use about on...

  • Page 12: How to Wash

    Select the desired wash programme • turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. The display shows the duration of the programmes in hours and minutes. Select the spin speed or no spin option • t...

  • Page 13

    English modification of a programme which is running to modify a programme, first set the machine to pause by pressing the start/pause button. Turn the selector dial to o to reset the programme, then select a new one. Depress the start/pause button to start it. Opening the door after the programme h...

  • Page 14: Programme Chart

    14 programme chart wash programmes programme fabrics additional functions max. Load energy kwh water lt duration min. Consumptions* e cotton and linen, for example normally to lightly soiled sheets and household linen lightly soiled coloureds, shirts, blouses, underwear non-fast coloured cotton and ...

  • Page 15: Programme Chart

    English 15 programme chart * the consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. Special programmes programme soak at 30°c. Stop with water in drum...

  • Page 16: Cleaning and Maintenance

    After each wash • at the end of the wash programme, pull the dispenser drawer out a little to let it dry. • leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: • close the water tap and unplug the appliance. Periodical cleaning bodywork • clean the outsi...

  • Page 17

    English 17 emergency emptying out if the water is not discharged (pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessary, wait until the water has cooled; • place a bowl on the ...

  • Page 18: Something Not Working?

    If, during the spin cycle, the machine makes an unusual whistling noise, different from the noise made by traditional washing machines, this is due to a new type of motor. If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than tradi...

  • Page 19: Problem

    English 19 problem • the machine does not empty and/or does not spin. • there is water on the floor. Possible cause • too much detergent has been used. • an unsuitable detergent has been used that creates too much foam. • one of the connectors on the water inlet hose is leaking. • the drain filter h...

  • Page 20: Problem

    20 problem • spinning starts late or the machine does not spin. Possible cause solution • the unbalance detection device that prevents excessive vibration during spinning and ensures a stable position has cut in. • if the laundry is not evenly distributed inside the drum at the beginning of the spin...

  • Page 21: Service

    English when can a service visit be charged during the guarantee period? • when it should have been possible to solve the problem by yourself, with the help of the troubleshooting chart (see section “something not working?”) • when the engineer has to come out several times because he has not been g...

  • Page 22: Connection

    • any electrical work required to install this appliance must be carried out by a qualified electrician. • any plumbing work required to install this appliance must be carried out by a qualified plumber. • after having installed the machine, check that it is not standing on its electrical supply cab...

  • Page 23: Installation

    English 23 unpacking all transit bolts and packing must be removed before using the appliance. • using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between ...

  • Page 24

    24 levelling carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Water inlet connect the water inlet hose supplied with the machine to a separate tap with a 3/4" thread. Do not us...

  • Page 25: Building-In

    English permanent connection in the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with th...

  • Page 26

    26 b) hinges to mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 14 mm) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm. The distance (b) from upper edge of the door to the centre of the hole depends on the adjacent furniture's d...