Kurzweil ME-1 V1.2 - ADDENDUM Manual

Page of 4

Download

Bookmark us

ME-1 VERSION 1.2 SOFTWARE SUPPLEMENT

-July 2003-

• What Is It?

Software version v1.2 is the latest set of feature enhancements for the ME-1 module.

• What Does It Do?

(i.e. what are the new features in v1.2?)

v1.2 adds the ability to enable/disable individual MIDI channels. See the section below

marked “Operation of New Feature” for operational details.

• How Do I Know If I Have v1.2?

If you received this document along with the purchase of a ME-1, then the v1.2 software

should already be installed in your unit. If you did not receive this document along with your

instrument or if you just want to confirm things, you can check what version of software you

currently have installed by doing the following:

1) turn it on while depressing the ‘bank/menu’ button.

2) following the KURZWEIL name scrolling across the screen you will see

EV ** and FV ** (stands for Engine Version and Front Version).

3) versions EV 11 and FV 12 or later should be shown

• Where Can I Get It If I Don’t Have It?

If you do not have v1.2 of the ME-1 ‘Front’ software and would like to get it, you can get your

ME-1 upgraded by taking your unit to an authorized Kurzweil Service Center where they

can update it for you.

To locate a service center near you please visit our website at:

http://www.kurzweilmusicsystems.com/support-service-center-search.html?Id=296

For further information please contact:

Email=

support@kurzweilmusicsystems.com

Web= www.kurzweilmusicsystems.com

Page 1
1 me-1 version 1.2 software supplement -july 2003- • what is it? Software version v1.2 is the latest set of feature enhancements for the me-1 module. • what does it do? (i.E. What are the new features in v1.2?) v1.2 adds the ability to enable/disable individual midi channels. See the section below m...
Page 2: Operation of New Feature:
Me-1 addendum 2 operation of new feature: enabling/disabling individual midi channels an enabled midi channel (on) will receive midi data. A disabled midi channel (off) will ignore midi signals received on that channel. Prior to this new v1.2 software all 16 midi channels were on all the time. With ...
Page 3
3 here is how to select an instrument using the front panel buttons following the table on page 9 in the ‘reference guide’: 1) press [mode select] button until ‘channel’ mode light is lit. 2) using the data knob, select the desired midi channel (1-16) 3) press [mode select] button until ‘program’ mo...
Page 4
Me-1 addendum 4 example #1: if, on midi channel 1, you want to select midi bank 0, “77=scatman”, then: 1) from your transmitting device (keyboard, sequencer, whatever) set it to send a midi bank message (controller 32) with a value of 0 on channel 1 to the me-1. 2) following, have your transmitting ...