Operating instruction and parts manual for 12010 dairy ashford road, suite 160 sugar land, tx 77478 281-313-2506 • 800-469-4178 warning do not attempt to start or operate the machine until all the instructions have been read and understood by the operator. Failure to do so could result in serious bo...
•after referring to the operation manual, if assistance is still needed, please consult our web site at www.Kushlanproducts.Com • from our web site you may e-mail us directly if assistance is still required, please call our customer service department at 1-800-469-4178 safety alert symbol: this safe...
Mixer instructions a. Lubrication: there are grease fittings on all models. Apply any type of ep grease until grease begins to come out of the bearings. Lubricate all fittings before each use b. Gearbox motor: mixer shipped with lubricate/oil in gearbox. Change lubricate/oil every 200 hours. Use syn...
Model 450 dd & removable liner parts list 4 qty item 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 description wire basket for drum plastic drum lid for 450dd liner 3/4 hp gear motor r clip pin drum handle side handle bolt pivot axle pin draw-bar hex head cap screw pu foam wheel 1” washer gear motor mount...
Model 350wsb & 350wsb with stand parts list gearbox and motor assembly parts list 5 qty item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 description part number dd-808 ddma-02 ddma-03 ddma-04 ddma-05 ddma-06 d...
Gearbox and motor assembly parts list 6.
Gearbox and motor assembly parts list assembly instruction 7 step 1 install wheels on lower frame unit step 2 put on washer and snap on r-clip. Step 3 insert draw bar into main frame. Step 4 put on swivel bracket to main frame. Step 5 put in bolt to hold main frame to draw bar. Step 6 take off the f...
Assembly instruction 8 step. 1 main frame place the main frame (a) on a level surface. Insert the draw bar (b) into the main frame. Secure with the 76.2 mm hex head bolt and nut (c) on top (a), and the looking bolt (d) to the side (b). (use the open wrench provided). Wheels - slide the wheels onto t...
Assembly instruction wheels - slide the wheels onto the main frame bar and secure with cotter pins. Assembly instruction 9 step. 3 mounting the mixing drum step. 4 tilting handle finally, insert both tilting handles (a) in the gearbox motor assembly mounting frame (b) (as shown) and lock using the c...
Transporting the mixer operation 10 disconnect the power cord. Hold the support leg and dump handle and move as shown below. Make sure there is no material in the drum maintenance and cleaning disconnect the power cord 1. Clean thoroughly after each use. Remove all material from the mixer 2. Lightly...
Kushlan products limited warranty policy kushlan products makes every effort to assure that its products meet high quality and durability standards and warrants to the original retail consumer purchaser of our products (you) that each such product be free from defects in materials and workmanship as...
