KUSSMAUL 091-10PIM Instruction Manual

Summary of 091-10PIM

  • Page 1

    1 instruction manual auto charge 20 pim automatic battery charger model #091-10pim 3 year warranty note : this charger is designed for vehicles with 3 batteries, negative ground and require a ground fault interrupter. File:091-10pim.P65 rev b: 12-18-03 kussmaul electronics co., inc . 170 cherry ave....

  • Page 2: Introduction

    2 introduction the auto charge 20 pim battery charger is a compact completely automatic charger designed for installation on vehicles with three batteries. Three individual chargers are provided to charge the three batteries. Voltage is sensed separately for each battery so that each battery is char...

  • Page 3: Installation Wiring Diagram

    3 installation wiring diagram important: charger output wire size is 12 awg. Wire size is for a maximum length of 20 feet. If wiring is to be longer, larger wiring is required. Additional information is available on request..

  • Page 4: Specification & Outline

    4 specifications: input: see chart output: see chart output current: see chart charge indicator: 0-20 amps 5% weight: 2 2 lbs specification & outline model # output current output voltage input voltage input current 091-10-6 20 amps 6 120, 50/60 hz 4.7 amps 091-10-12 20 amps 12 120, 50/60 hz 4.7 amp...

  • Page 5

    5 installation record & warranty date installed installed by vehicle identification vehicle owner warranty all products of kussmaul electronics company inc. Are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, ...