KUSSMAUL 091-12PIM Instruction Manual

Summary of 091-12PIM

  • Page 1

    Instruction manual auto charge 12 pim automatic battery charger model #091-12pim tel: in ny 631-567-0314 toll free: 800-346-0857 fax: 631-567-5826 3 year warranty note : this charger is designed for vehicles with single batteries and either negative or positive ground. Input: 120 volts a.C., 50/60 h...

  • Page 2: Introduction

    This procedure defines the installation and wiring for the auto charge 12 pim automatic battery charger. It is suggested that the installer read the entire instruction manual to become familiar with the tasks involved before starting. The auto charge 12 pim automatic battery charger is a compact com...

  • Page 3: Installation Wiring Diagram

    Installation wiring diagram note: the sense leads must be connected for the charger to operate. Power battery sense + _ auto charge 12 pim + _ important: battery + and - wire size is 12 awg. Sense + and - wire size is 16 awg. Wire size is for a maximum length of 20 feet. If wiring is to be longer, l...

  • Page 4: Specification & Outline

    Auto charge 4.25 12.75 4.75 6.75 outline drawing 9/32" dia. 4 holes 12.00 specification & outline specifications: input: 120 volts a.C., 60hz, 4 amps output: adjustable 13.3 volts nominal output current: 0-12 amps d.C., current limit charge indicator: 0-15 amps 5% weight: 16 lbs.

  • Page 5: Warranty

    Installation record & warranty date installed installed by vehicle identification vehicle owner all products of kussmaul electronics company inc. Are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any materia...