1. DL manuals
  2. KUSSMAUL
  3. Automobile Accessories
  4. 091-20WP
  5. Instruction Manual

KUSSMAUL 091-20WP Instruction Manual

Summary of 091-20WP

  • Page 1

    Instruction manual 1 year warranty kussmaul electronics co., inc . 170 cherry ave., west sayville, n.Y. 11796-1221 2-10-00 file: 091-20wp-xx tel: in ny 631-567-0314 toll free: 800-346-0857 fax: 631-567-5826 auto eject wp automatic shore line disconnect.

  • Page 2: Caution

    Caution the auto eject must be connected to the starter circuit so that the solenoid is energized only while the engine is cranking. If the solenoid is energized continuously it will overheat and burn out. If the auto eject is installed where the rear mechanism can accumulate dirt, grime or water yo...

  • Page 3

    Installation instructions 1. Locate a convenient place on the vehicle to mount the auto eject. A minimum clearance of 4” behind the mounting panel is required as well as 3 3/4” below the center line to clear the ejection mechanism. 2. Place the template in position and center punch in 7 places. 3a. ...

  • Page 4: Auto Eject

    3.250 2.125 1.875 3/16” dia hole 2 1/4” dia hole drill these two holes first 1/2” dia hole c l l c c l l c hole template auto eject dynamic disconnect auto eject enclosure model # 091-18-098 the model 091-18-098 dynamic disconnect is a coupling device wired between an auto eject and the vehicle and ...

  • Page 5: Warranty

    Installation record & warranty date installed installed by vehicle identification vehicle owner warranty all product of kussmaul electronics company inc. Are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any...