1. DL manuals
  2. KUSSMAUL
  3. Power Supply
  4. 091-92-12
  5. Instruction Manual

KUSSMAUL 091-92-12 Instruction Manual

Manual is about: LOW RIPPLE POWER SUPPLY / AUTOMATIC LOAD SWITCH FOR 12VDC VEHICLE SYSTEMS

Summary of 091-92-12

  • Page 1

    Instruction manual 3 year warranty kussmaul electronics co., inc . 170 cherry ave., west sayville, n.Y. 11796-1221 file: im_091-92-12_rev_b date: 09-15-04 tel: in ny 631-567-0314 toll free: 800-346-0857 fax: 631-567-5826 battery saver low ripple power supply / automatic load switch for 12vdc vehicle...

  • Page 2: Installation

    Installation the 091-92-12 battery saver is a power supply with a load power transfer function. Loads connected to the battery saver are powered by the vehicle’s battery when the ac power to the 091-92-12 battery saver is off. When ac power is applied to the 091- 92-12 battery saver special circuitr...

  • Page 3: Test and Operation

    Test and operation the 091-92-12 battery saver system interface panel contains two (2) green leds as follows: refer installation wiring diagram, figure 1. "load power" led: illuminates when power is being supplied to the load(s) regardless of the source of the power (vehicle battery or battery saver...

  • Page 4: Installation  Precautions

    Installation precautions refer figure1, installation wiring diagram and specifications & outline the 091-92-12 battery saver is ac input and dc output over-current protected as follows: 115vac 60hz input: 5 ampere dc output: atc, 10 ampere the atc 10 ampere dc output fuse internal to the battery sav...

  • Page 5: Installation Wiring Diagram

    Installation wiring diagram figure 1 115vac input n l batt svr pwr load power system ground batt svr dc out 12vdc bat + in dc system 115vac, 60hz line, awg 18 neutral, awg 18 earth, awg 18 accessories radios hand lights + 12v vehicle battery 12v vehicle ground batt svr pwr "on" green led load pwr "o...

  • Page 6: Specification & Outline

    Specification & outline specifications: input power: 115 volts ac., 50/60hz, 1.8 amperes rms input fuse: f1, 5 ampere, fast acting, 5 x 20mm, littlefuse p/n 21605, inside enclosure output voltage: 13.2 volts, d.C. ( factory adjustable) output ripple: 30 millivolts, ac., rms output current: 10 ampere...

  • Page 7: Warranty

    Installation record & warranty date installed installed by vehicle identification vehicle owner warranty all product of kussmaul electronics company inc. Are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any...