File: im_091-145-12_revb.Indd rev: b revised by: mfg date: 3-25-2014 auto charge dual automatic dual output battery charger scan using your mobile device for more information instruction manual input: 120 volt, 50/60 hz, 3.5 amps output bat 1: 10 amps output bat 2: 10 amps 3 year warranty model #: 0...
Important safety instructions i. Personal precautions: 1. Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid battery. 2. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes. 3. Wear complete eye...
Introduction the auto charge dual is a compact, completely automatic dual output battery charger designed spe- cifically for installations that require 24 volts for starting and 12 volts for accessories. The two batteries are connected in series to obtain 24 volts and the output of each charger is c...
Wiring i. Battery charger wiring instructions 1. Refer to installation wiring diagrams i and ii. 2. Refer to wiring specifications to determine the recommended wire size and maximum lengths. Using a smaller gauge may cause overheating of the terminal. Additional information is available upon request...
Installation wiring diagram i. For 2 individual batteries wiring diagram shown is for a 10 foot installation 5 170 cherry avenue west sayville, ny 11796 www.Kussmaul.Com ph: 800-346-0857 fax: 631-567-5826 sales@kussmaul.Com.
Ii. For 24 volt starter and 12 volt accessries wiring diagram shown is for a 10 foot installation 6 170 cherry avenue west sayville, ny 11796 www.Kussmaul.Com ph: 800-346-0857 fax: 631-567-5826 sales@kussmaul.Com the series connection of the two 12 volt batteries produces 24 volts. Each battery is i...
Specifications input power: 120 volt, 50/60 hz, 3.5 amperes input voltage range: 105-132 vac input current max (@132 vac): 5 amps inrush current: 7 amps input fuse: 8 ampere, fast acting output power - bat 1 & bat 2: 12 volts dc, 20 amperes max, total output output voltage (no load): 13.25 vdc (per ...
Installation record date installed _______________________________________________________ installed by _________________________________________________________ vehicle identification _______________________________________________ vehicle owner _____________________________________________________...
