Kustom Defender V50 Owner's Manual - page 8
6
A
m
p
S
p
e
c
i
f
i
c
a
t
i
o
n
s
Model
Defender 112
All-Tube Guitar Combo Amp with 12-inch speaker
Power Amp Tubes
2-EL34 power tubes using AUTOKRUISE™ biasing scheme
Preamp Tubes
3-12AX7 preamp tubes(2 preamp, 1 phase inverter)
Output Power
50 W RMS
16, 8, or 4 Ohms @ 5% THD
Speaker
1 X 12 inch
KEI(Kustom-Eminence Integrated) EPIC-12, 16 Ohm
Input Impedance
Hum & Noise
-63dBV
Residual Noise, all level controls 0% (minimum), Bright Off, Presence @ 0
60 dB
Nominal Gain, Volume @ 5
86 dB
Maximum Gain, Volume @ 10
Gain = +10 dB
Maximum gain of footswitchable volume boost
Gain = +3 dB
Gain increase at 1 kHz when Bright is switched
Nominal Signal to Noise 60 dB
Volume half and Master maximum, Boost on 10
Footswitchable Boost Master Volume Boost Adjustable from 0 to +10 dBV, nominal -6dBV
USA/Canada
120VAC/60Hz, 180W
Europe
230VAC/50Hz, 180W
UK
230VAC/50Hz, 180W
Australia
240VAC/50Hz, 180W
Japan
100VAC/50-60Hz, 180W
mm/kg
486 mm (Height) X 569 mm (Width) X 261 mm (Depth), 17.3 kg
inches/pounds
19.125" (Height) X 22.375" (Width) X 10.25" (Depth), 38 Lbs
1M Ohms
Tubes
Power Requirements
Footswitch
System Gain
Dimensions/Weight
Is compatible with single button Kustom Footswitch, part # KAC-FS100
Uses a standard mono shielded cable
The Defender Specifications