Congratulations on the purchase of your new kustom bass amplifier. Your model kxb500 mini bass head was designed for gigging players who seek professional tone, smart features and reliable performance in a light and portable configuration. Inside this manual, you’ll find valuable information about t...
Kustom.Com fcc statements 1. Caution: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: this equipment has been tested and found to comply with the limits for a class b digital devic...
Kustom.Com english.
French kustom.Com.
Kustom.Com 1. Input: this is a ¼-inch input jack that is used to connect your bass to the amplifier’s circuitry. It is designed to accommodate passive or active instruments with up to 3 volts maximum rms output (4.2 volts peak). It is optimized for bass guitars but will accept other instruments as w...
Kustom.Com 1. Speaker outputs: power output is 500 watts with a total minimum speaker load of 4 ohms. For full power, use two 8-ohm speaker cabinets in a parallel configuration or a single 4-ohm cabinet. A single 8 ohm cabinet may be used but less output power will be received by the speaker. Note 1...
Kustom.Com kustom ® kxb500 specifications output power 500 watts typical 4 ohms at 10% thd+n 300 watts typical 8 ohms at 10% thd+n input impedance single input 690k ohm gain 76 db typical gain and master at max, all eq at 12 o’clock nominal sensitivity 200mv gain = 12 o’clock, volume = 12 o’clock, t...
Kustom.Com kxb500 signal flow diagram.
Kustom.Com.
Www.Kustom.Com kustom amplification, inc. 3015 kustom drive hebron, kentucky usa 41048 888-4-kustom (888-458-7866) all specifications are subject to change without prior notice. ©2010 kustom.