Kuvings FROZEN DESSERT MAKER Manual & Recipes - page 2
Lid
Work Bowl
Juicing Screw
*same part from
Silent juicer
ᩕฝ
1. Insert and push down the juicing screw into the work bowl
2. Align the dots
●
on the lid and the work bowl. While the
dots
●
are aligned, place the lid on the work bowl to com-
bine the parts.
3. After the lid has been correctly placed on the work bowl,
twist the lid clockwise until it locks onto the work bowl.
(Align
symbol with
●
symbol)
Insert the juicing screw into the work bowl and
close the lid.
STEP 1 ▶
ᩕฝ
Frozen
Dessert
Maker
Base
Attach the Frozen Dessert Maker onto the base
STEP 2 ▶
Lever
Switch the lever side to side to
adjust for diff erent ingredients.
Position 1
Use for ice
Position 2
Use for all ingredients
STEP 3
• The lever unit can be disassembled for cleaning.
• After washing, please dry the lever before reassembly.
• Before using, make sure the lever is in the 1 or 2
position (depending on the ingredients used).
Tip |
1. Place the lever in between position 1 and 2 to be vertically upright.
2. Slide the lever unit down by pressing from the top, and then,
remove the lever unit by pushing inwards.
Disassembling the lever unit:
• Only use the pusher when pushing ingredients in.
• Do not adjust the lever during operation.
• While operating, do not try to pull ingredients out with
fi ngers, utensils, etc.
• Hard vegetables or fruits like carrots should be cut into
small pieces and fed slowly.
• Seeds should be removed from ingredients like apples or
lemons before inserting.
• Hard ingredients like nuts and seeds should be avoided
as they can cause damage.
• Grains like rice, beans, etc. should be boiled or soaked
overnight before use to prevent damage.
• Leafy greens are not suitable.
• Ice should not exceed 1 ½ inch cube size.
• Frozen fruits must be thawed before use (5 minutes
minimum).
FROZEN DESSERT MAKER MANUAL
Caution
ᩕฝ
ᩕฝ
Product
Mincer
(Frozen Dessert Maker)
1. Place the assembled attachment on the base ensuring the down
arrow
▼
fon the lid is aligned with the up arrow
△
on the base.
2. Turn clockwise aligning the down arrow
▼
on the lid with the up
arrow
▲
on the base.