ⓤm1. J80. E120509 kuvings us customer service: phone 1 (888) 682-5559 email support@nuc.Kr headquarters: nuc electronics co., ltd 679, chimsan-3dong, buk-gu, daegu, 702-053, korea ©2012 kuvings all rights reserved carefully read and save these instructions household use only / us&canada use only (11...
The following information is critical to prevent any injuries or damage to the appliance. Please read the following instructions and use the appliance properly. Warning: this sign warns risk of death or severe injuries. Caution: this sign warns risk of injuries or product damage. Prohibited do not d...
Use a dry towel to clean the power cord. *it may cause an explosion or electric shock. Do not use any hazardous chemicals to clean the appliance. * it may change the color of the appliance or could result in a fi re. Do not repair, disassemble the base, or customize the appliance. * the appliance ma...
Easy to use the juicing bowl and base can be separated for easy cleaning and assembly. - power switch - - two-step safety device - the base and the juicing bowl unit must be assembled properly before turning the switch on. Juicing screw rotation wiper strainer drum lid hopper pusher juicing bowl bas...
Place the juicing screw into the center of strainer, and place the set into the rotation wiper. * turn and push in the juicing screw until it clicks into place. Assemble the entire top set onto the base ensuring the arrow symbol on the drum lid is aligned with the arrow symbol on the base. Align the...
. Do not operate the juicer without inputting any food for more than 30 seconds. (it may cause a malfunction) . Place juice cup and pulp cup into position to prevent any spill or to minimize clean up. . During the operation, the juicer may produce a squeaking noise. It will disappear after inserting...
Turn the drum lid counter clockwise to open. Ensure the power switch is in off position and unplug the power cord from the wall outlet. *ensure all the pulp is cleaned out of the juicer. Disassemble following the instruction given on page 12. Turn the juicing bowl counter clockwise and lift the juic...
Carefully read before extracting the silicone parts can be removed and cleaned separately. Dry thoroughly after cleaning and assemble the silicone parts following the instructions below. *juice may leak if the silicone parts are not assembled correctly. Gently pull out the silicone brush from the ro...
Motor is stuck or has stopped juice yield is low juicing bowl shakes in the middle of operation seems like juicing screw is grinding juicer is noisy ㆍcheck that the cord is plugged in properly ㆍcheck all parts are assembled correctly. ㆍ the juicer may stop if the ingredients are fed into the hopper ...
Product model number voltage power consumption maximum use weight dimension manufacturer compression type juicer ul-100, ul-110 120v~, 60hz 240w less than 30 min 15.4 lbs (7kg) 9.7 x 6.5 x 17.2 inch (245 x 165 x 435 mm) nuc electronics co., ltd. Low speed note specifi cations 19 18 www.Kuvings.Com.
