The future of sound. Made perfectly clear. At kv2 audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic representation of the source. Our aim is to create audio products that absorb you, place you within the performance and ...
Contents introduction 3 how to use this manual 3 icons used include: 3 introducing the ex10 3 electronics 3 acoustic components 4 enclosure design 4 4 applications ac power 4 chapter 1: ac power requirements 5 voltage requirements 5 the power connector 5 current requirements 5 ac cable color coding ...
How to use this manual as you read this manual, you’ll find figures and dia- grams to help you understand and visualize what you’re reading. You’ll also find numerous icons that serve as cues to flag important information or warn you against improper or potentially harmful activities. Icons used include...
Acoustic components kv2 audio has developed a revolutionary woofer technology called trans-coil™. The woofer has two coils, a standard voice coil assembly and a second coil placed directly on the neodymium magnetic circuit’s pole piece. This technology eliminates voice coil in- ductance resulting in...
Ex10 user guide p. 5 voltage requirements the ex10 operates safely and without audio discon - tinuity if the ac voltage stays within the operating win- dow of 100v-120v in 115v mode, 205v-240v in 230v mode and 225v-260v when working in 250v mode, at 50 or 60hz. Caution: if the on led does not illumi...
Ex10 user guide p. 6 ac cable color coding if the colors referred to in the diagram don’t correspond to the terminals in your plug, use the following guide- lines: connect the blue wire to the terminal marked with a n or colored black. Connect the brown wire to the terminal marked with an l or color...
Ex10 user guide p. 7 the ex10 control panel the ex10 features an easy to use rear control panel featuring audio input and output, level control, led status lights and a low pass filter that can be engaged when the loudspeaker is used as a stage monitoring device. Audio input and output the ex10 uses ...
Ex10 user guide p. 8 operating level. This type of protection allows the phase response of the system to remain unchanged as the level is lowered. By not compressing or limiting peak signal, dynamics also remain unchanged. The control objective is to regulate the operating temperature of the transdu...
The ex10 horn can be rotated ninety degrees in order to accommodate applications where the speaker will be used or installed horizontally. This can be accomplished by removing the front grill. Removing the horn, rotating and replacing the horn. Replacing the front grille. 90 ex10 user guide p. 9 cha...
Ex10 user guide p. 10 system acoustic perfomance max spl long-term 126db max spl peak 129db -3db response 65hz - 20khz -10db response 55hz - 28khz crossover point 1.6khz high frequency section acoustic design horn loaded high horn coverage horizontal / vertical 100° x 80° rotatable horn yes throat e...
Ex10 user guide p. 11 telescopic speaker pole for es/ex series part name: kv2-l part number: kvv 987 041 - 35mm top hat adapter for ex brackets part name: top hat adapter part number: kvv 987 090 - i ncluding connection bolts horizontal bracket for ex10 part name: ex10 horizontal bracket part number...
The future of sound. Made perfectly clear. Kv2 audio, nádražní 936, 399 01 milevsko, czech republic tel. +44(0)1423 816868 www.Kv2audio.Com kvv120008-00-04-0 at kv2 audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic repre...
