KV2 Audio SL2.15 User Manual

Other manuals for SL2.15: User Manual

Summary of SL2.15

  • Page 1

    S sl3000 s sl412 s sl2.15 the future of sound. Made perfectly clear. At kv2 audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic representation of the source. Our aim is to create audio products that absorb you, place you w...

  • Page 3: Sl Series

    Sl series contents 3 sl series introduction 4 sl3000 overview 5 getting started 6 features - front panel 7 features - rear panel 8 using the system - full range 9 using the system - subwoofers 10 specifications 11 block diagram 12 sl412, sl412i overview 13 technology 14 specifications 15 frequency c...

  • Page 4: Introduction

    Thank you for purchasing this kv2 audio, sl series system, consisting of the sl3000 stereo controller/amplifier unit, two sl412 speakers and optional variants of subwoofers. The new sl412 and sl2.15 speakers incorporate an eye catching, slim, stylish cabinet design. Designed to integrate either exte...

  • Page 5: Sl3000 Amplifier

    Kvv 987 176 kvv 987 083 kvv 987 084 vhd3200 -250v vhd3200 -230v vhd3200 -115v s the amplifier compliment inside the sl3000 amplier is as follows: - high frequency - 100-watt, class ab, push pull, low intermodulation design - mid frequency - 200-watt, class ab, push pull, low intermodulation design -...

  • Page 6: Getting Started

    Cooling the sl3000 amplifier have a comprehensive cooling system featuring chassis sealed pcb board mounting and shock mounted, speed controlled fans. This means that the cooling system never drives air across pcb boards, connectors or components, ensuring prolonged electronic component lifespan and...

  • Page 7: Features

    Features front panel 1) ac mains switch the sl3000 amplifier has a combination ac main switch/circuit breaker on the front panel. If the switch shuts off during normal use, push it back to the on position once. If it will not stay on you should take the unit to qualified service personnel to have it...

  • Page 8: Features

    Features rear panel 1) main input / trought out this is the main system input balanced xlr connector with associated through signal output connector for sending unprocessed signal to other devices in a system. 2) sub out balanced xlr output connector, used to connect additional subwoofer. Output is ...

  • Page 9: Using The System

    Using the system full range setup set sl3000 amplifier to full range on mode. Sl412 cabinets plays full range signal. Throught out sub out sub out throught out main input main input sub level full range mono off on off on ac in a ac in b www.Kv2audio.Com designed by kv2 audio manufactured in the eur...

  • Page 10: Using The System

    Throught out sub out sub out throught out main input main input sub level full range mono off on off on ac in a ac in b www.Kv2audio.Com designed by kv2 audio manufactured in the european union serial number warning: to ensure proper operation allow a minimum of 6 ins. Of clearance from this surface...

  • Page 11: Specifications

    Specifications output channels number of channels 2 (stereo) total output power 2x 1300w high frequency amplifier specification type class ab - push pull - low im design transformer balanced output rated continuous power 100w distortion operating bandwidth 400hz ÷ 2,5khz mid frequency amplifier spec...

  • Page 12: Block Diagram

    Block diagram full range off on mono off on main input main ac in through signal out control pre, eq sub out pro tection po wer suppl y signal mana gement control unit hi 2,5 kh z - 40 k h z 100 w output midhi 500 h z - 2,5 k h z 200 w midl o w 10 h z - 500 h z 1000 w ext sub level ± 6 db signal pre...

  • Page 13: Sl412, Sl412I

    S proprietary midrange heat dissipation system controls voice coil temperature, ensures high dynamics and extends transducer lifespan s front-loaded, 4x twelve-inch mid-bass drivers with 3.00” voice coil assembly and neody- mium magnetic motor structure s professional, exterior-grade baltic birch co...

  • Page 14: Technology

    Mid/high horn design the sl412 features a mid/high integrated horn design with a number of unique features. The horn design is based on constant directivity geometry with an emphasis on maintaining low transducer compression ratios, high output and wide dispersion (110° x 40°). The midrange speaker ...

  • Page 15: Specifications

    Specifications sl412 specifications 15 system acoustic perfomance max spl long-term 134db max spl peak 137db -3db response 70hz ÷ 22khz -10db response 58hz ÷ 22khz high frequency section acoustic design horn loaded high horn coverage horizontal / vertical 110° x 40° rotatable horn no high frequency ...

  • Page 16: Frequency Characteristics

    Frequency response frequency characteristics sl412 frequency characteristics 16.

  • Page 17: Drawing

    The three-way, mid / high loudspea- ker system shall incorporate four 12-inch mid-bass (mb) transducer a 8-inch mid range (mr) speaker and a 1.4-inch exit compression driver high frequency (hf) transducer. The lf drivers are direct radiating, tuned for optimum mid-bass response. The hf and mr transd...

  • Page 18: Drawing

    Drawing sl412i drawing 18 the three-way, mid / high loudspea- ker system shall incorporate four 12-inch mid-bass (mb) transducer a 8-inch mid range (mr) speaker and a 1.4-inch exit compression driver high frequency (hf) transducer. The lf drivers are direct radiating, tuned for optimum mid-bass resp...

  • Page 19: Sl2.15, Sl2.15I

    S professional, exterior-grade baltic birch construction with wear-resistant polymer coating proprietary side handle designs for simplified handling and carrying s internal corner and back brace with m10 suspension points. A total of 20 suspension points are available for custom installa- tion applic...

  • Page 20: Technology

    Sl2.15 rear panel (cable connection to sl3000 unit amplifi er/controller) technology the sl2.15 is a compact, slim cabinet, high output bass module designed as a component of an sl series sound reinforcement speaker system. The sl2.15 was designed as a direct radiation system with bass reflex, this s...

  • Page 21: Specifications

    Specifications sl2.15 specifications 21 system acoustic perfomance max spl long-term 129db max spl peak 132db -3db response 40hz ÷ 500hz -10db response 35hz ÷ 500hz sensitivity 100db impedance 8Ω crossover point 100÷500hz low frequency section acoustic design direct-radiating with bass reflex subwoo...

  • Page 22: Drawing

    Drawing sl2.15 drawing 22 the bass module loudspeaker system shall incorporate two 15-inch low frequency (lf) transdu- cer with ferrite motors and 3-inch polymide, high-temperature voice coils. The lf driver shall be moun- ted inside a compact wood enclosu- re with bass reflex design. This speaker s...

  • Page 23: Sl2.15I

    Sl2.15i drawing drawing 23 the bass module loudspeaker system shall incorporate two 15-inch low frequency (lf) transdu- cer with ferrite motors and 3-inch polymide, high-temperature voice coils. The lf driver shall be moun- ted inside a compact wood enclosu- re with bass reflex design. This speaker ...

  • Page 24: Sl S

    Amphenol ap4 cable-mount female connector part name: ap-4-11 part number: kvv 987 048 amphenol ap4 cable-mount male connector part name: ap-4-12 part number: kvv 987 049 sl top bracket with screws part name: sl top bracket - screws part number: kvv 987 300 - 7 pcs m10 hex screws included - 1pc allen...

  • Page 25: Sl Series

    Sl series configurations configurations 25 sl3000 front view : rear view : sl3000 input a hi/mid out ch-a hi/mid out ch-b sl3000 hi/mid out ch-a sl412 1 m 2 m 0 m 3 m 4 m 0 m 1 m 0,35 m 2 m mh120 amplifiers ch - a, b full range off on input b sl - full range mode sl - configuration a description t4u...

  • Page 26: Sl S

    Sl s eries configurations configurations 26 sl - configuration c sl - configuration d description t4ufsfptztufnsfrvjsft y4-tufsfpbnqmjöfs y7)%tvcbnqmjöfs t6qupqfpqmf t/vncfspgcbttdbcjofut boe46#-&7&-tfuvq efqfoetpouiftuzmfpgnvtjd products: count product 4- 7)% 4- 7)% accessories: count accessory tit...

  • Page 28

    The future of sound. Made perfectly clear. Kv2 audio, nádražní 936, 399 01 milevsko, czech republic tel. +44(0)1423 816868 www.Kv2audio.Com kvv120084-00-02-0 at kv2 audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic repre...