Summary of Thermal-Eye X200xp
Page 1
User manual.
Page 2
2.
Page 3
3 this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi...
Page 4
4 user manual p/n 7070431 ©2005 l-3 communications infrared products. All rights reserved patents this product is covered by one or more of the following patents: u.S. Patent nos.: 5,288,649; 5,367,167; 6,267,501; 6,586,831; 6,521,477; 6,690,014; 6,479,320 and under license to 5,196,703. Euro.Pat.Ap...
Page 5
5 1. Introduction .............................................................................. 6 • welcome to infrared.......................................................... 6 • handling & precautions..................................................... 8 • contacting l-3 communications infrare...
Page 6
6 1. Introduction thank you for choosing the x200xp thermal imaging camera. With its small size, rugged design, and simplicity, you can now focus on the job at hand, rather than the camera in your hand. Before using this camera, please read these instructions carefully, and retain them for future re...
Page 7
7 the x200xp was designed to sense differing amounts of long wavelength infrared coming from the various areas of a scene and to convert them to corresponding intensities of visible light on a display. This allows true see–in–the–dark capability, as well as the ability to discern additional informat...
Page 8
8 • handling & precautions ⇒ all batteries can cause property damage or bodily injury if a conductive material such as jewelry or keys touch exposed terminals. Exercise care when placing batteries inside a pocket, case, or other container with metal objects. ⇒ do not replace batteries in a potential...
Page 9
9 2. Operation • the x200xp thermal imaging camera rubber armored construction submersible to 3 meters floats in water standard aa batteries viewing range – 15ft to infinity rotate lens for close range (4ft -15ft) single button operation variable brightness display long eye-relief – can be used w/gl...
Page 10
10 • holding the camera ⇒ the camera can be mounted to a tripod using the 1/4-20 insert. ⇒ the camera can be held either right-handed, or left-handed. ⇒ to avoid dropping the camera, attach the strap provided. Both a neck strap, and a wrist strap are provided for your convenience. Attach the strap t...
Page 11
11 • loading the batteries open the battery door unscrew battery door knob counterclockwise open the door to install batteries install 2 aa batteries “+” & “ – “ symbols inside the battery compartment indicate the direction to install batteries notice the raised tab next to the (+) sign, and the sun...
Page 12
12 close the battery door close the battery door screw battery door knob clockwise batteries ⇒ the camera will operate from several battery types – alkaline, nickel-metal-hydride (nimh) rechargeable, or lithium - as long as the batteries are aa size. ⇒ the camera does not have an internal battery ch...
Page 13
13 batteries ⇒ when replacing batteries, always replace both batteries. Mixing a fresh battery with a partially discharged battery is potentially hazardous. ⇒ never mix battery types (alkaline, rechargeable, lithium, etc). Both batteries must be of the same type. ⇒ remove batteries if the camera is ...
Page 14
14 camera will shutter only if it’s internal temperature changes by 10 0 c or more. Automatic contrast video contrast is constantly adjusted either higher or lower, based upon the informational content in the scene. When viewing people, automobiles, boats, and other warm objects at close range, the ...
Page 15
15 • adjusting the display brightness turn the on/off knob past the on/off detent, continuing to increase the lcd display brightness. Brighter lcd display: turn clockwise dimmer lcd display: turn counterclockwise to maximize battery life, set the lcd display to the minimum brightness setting practic...
Page 16
16 • focusing for close-up operation the x200xp has overall viewing range from 15ft to infinity. In the far focus position, objects from 15ft to infinity will be in focus. By rotating the lens, objects as close as 4ft can be brought into focus. The lens may feel difficult to turn. This is normal, an...
Page 17
17 3. Accessories contact l-3 communications infrared products, for accessories that are approved for use with your x200xp camera. • accessory video & power cables common accessories for the x200xp camera are: ac/dc power adapter power cable video cable these may appear the same as common power/vide...
Page 18
18 ac/dc power adapter connect the ac/dc power adapter to the x200xp connector labeled “power”, and to ac power (wall outlet). Connecting the ac/dc power adapter will disable the batteries, and the x200xp will receive its power from this outlet. The ac/dc power adapter will provide power to the came...
Page 19
19 4. Additional information • specifications detector type amorphous-silicon microbolometer spectral response 7 to 14 microns thermal performance time to operation ~ 3 seconds contrast/level automatic (electronic image control) image touch-up automatic (mechanical shutter) infrared polarity white-h...
Page 20
20 physical size 5 ¼ x 4 ½ x 2 (inches) 13.4 x 11.4 x 5.1 (cm) weight 13oz. (381g) with batteries eye cup integral to camera; with 2” eye relief environmental operating temperature -20 0 c to +60 0 c storage temperature -20 0 c to +80 0 c* waterproof yes, 3 meter submersion buoyant yes, floats in wa...
Page 21
21 • frequently asked questions q1 can different battery types be used? A1 as long as the battery is an aa size, the user can install alkaline, nimh rechargeable, or lithium. Q2 why does my camera sometimes behave erratically? A2 when batteries become very low, the camera may behave erratically (i.E...
Page 22
22 • trouble shooting guide problem possible cause possible remedy after waiting the 3 seconds of warm up, the video does not appear, but the logo keeps flashing low battery power replace batteries the lcd display brightness is too low adjust the display brightness by turning the on/switch clockwise...
Page 23
23 problem possible cause possible remedy the battery gauge shows empty external power is connected to the camera. When external power is connected, the battery gauge will indicate empty, regardless of the condition of the batteries installed the internal display is “flickering/ flashing”, has a “gh...
Page 24
24 l-3 communications infrared products • warranty product(s) will conform to l-3 ip’s current drawings and specifications at the time of delivery and be free from defects in material and workmanship under normal use and service for twelve (12) months, beginning on the date the product is delivered ...
Page 25
25 in no event shall l-3 ip or its licensors be liable for indirect, incidental or consequential damages, loss of profits, loss of use or data or interruption of business, whether under theories in tort, contract or otherwise, even if l-3 ip or its licensors have been advised of the possibility of s...
Page 26
26 how to return products for warranty repair: 1. Return the product to your authorized dealer. The dealer will notify the service department by telephone at 800–990–3275 (us) or 972-528-1528 (int’l) before returning any product. 2. A return authorization (ra) number will be assigned by the service ...
Page 27
27.
Page 28
28 l-3 communications infrared products customer service department 13532 north central expressway, ms 37 dallas, texas 75243 800-990-3275 (u.S.) 972-528-1528 (international) 7070431 rev b.