- DL manuals
- L-Acoustics
- Enclosure
- KIVA SB15M
- Rigging Manual
L-Acoustics KIVA SB15M Rigging Manual
Summary of KIVA SB15M
Page 1
Kiva system kiva sb15m rigging manual version 1.1 w w w . L - a c o u s t i c s . C o m.
Page 2
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 2 safety instructions 1. Read this manual 2. Follow all safety instructions as well as danger and obligation warnings 3. Never incorporate equipment or accessories not approved by l-acoust...
Page 3
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 3 welcome to l-acoustics ® thank you for choosing the l-acoustics ® kiva enclosure. This document contains essential information on rigging the system properly. Carefully read this document in order to become familiar with this procudures....
Page 4
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 4 1rigging system components the system approach developed by l-acoustics ® consists in providing packaged solutions for loudspeaker system in order to guarantee the highest and most predi...
Page 5
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 5 kiva sb15m kibu-sb clamp250 sb15mrig equipped with locktab (delivered with the sb15m) kiet soundvision main components involved in the kiva rigging process..
Page 6
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 6 2mechanical safety 2.1 maximum configurations the kiva system rigging complies with bgv-c1 (2012), din 18800 and en iso 12100-1 (2004) when the following arrays are deployed. The safe co...
Page 7
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 7 3system setup the kiva-sb15m rigging system relies on the use of kibu-sb as an interface between the two enclosures rigging systems. Each side of kibu-sb is compatible with one enclosure type: kiva side sb15m side.
Page 8
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 8 3.1 ground-stacking kiva remove the rigging bars from a kibu-sb. Place the kibu-sb on the ground with its kiva side facing up. Attach a kiva (logo on the left-hand side) to the kibu-sb. ...
Page 9
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 9 3.2 flying kiva place a kibu-sb on the ground with its kiva side facing up. Attach a kiva enclosure to the kibu-sb. Refer to procedure b. Turn the kiva/kibu-sb assembly upside down. Attach a bow shackle wll 1 t or a clamp250 on the kibu-...
Page 10
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 10 3.3 pole-mounting kiva + sb15m place a sb15m (logo down) on the ground. If two kiva are required, place one enclosure on the ground (logo on the left-hand side) and attach a second encl...
Page 11
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 11 4subset procedures attaching the sb15m to a second element procedure a 1. Remove the bar from its storage location. 2. From the front of the array, slide the bar into adjacent rigging rails. 3. Secure the bar with the locking tab. A. Ac...
Page 12
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 12 attaching kiva to a another element procedure b the rigging procedure used to attach a kiva enclosure to another kiva enclosure and to kibu-sb is similar. The main difference lies in: t...
Page 13
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 13 1. If you are attaching a kiva enclosure to a kibu-sb, refer to the soundvision modeling to identify the position (rear, front) that corresponds to the targeted site angle. 2. Attach the two linking points at the front of the enclosure ...
Page 14
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 14 3.A. Releasing the angulation arm. Attaching the angulation arm of a kiva to kiva. 3.B. Attaching the angulation arm of a kiva to kibu-sb..
Page 15
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 15 attaching a shackle or clamp250 procedure c 1. Refer to soundvision modeling to identify the hole number that corresponds to the targeted tilt angle. Kibu-sb hole numbering on the side of the sb15m kibu-sb hole numbering on the side of ...
Page 16
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 16 attaching kiet to kiva procedure d the site angle of a pole-mounted kiva enclosure is defined by its angle with the kiet. Refer to figure 2 to choose the hole corresponding to the targe...
Page 17
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 17 procedure d 1. Assembling the kiet and its pole adapter. 2. Attaching the kiet and the enclosure. 3. Securing the enclosure angulation arm on the kiet..
Page 18
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 18 appendix a installing the lap-teq inclinometer the kibu-sb is equipped with a laser support plate for the installation of the teqsas ® lap-teq inclinometer. The lap-teq is a remote cont...
Page 19
Kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 19 appendix b specifications kiva description 2-way passive enclosure, amplified by la4 or la8 usable bandwidth (-10 db) 80 hz - 20 khz ([kiva] preset) maximum spl 1 130 db ([kiva] preset) coverage angle (-6 db) horizontal: 100° (from 500 ...
Page 20
Kiva system kiva sb15 m rigging manual version 1.1 kiva-sb15 m _rm_en_1.1 w w w . L - a c o u s t i c s . C o m 20 sb15m description subwoofer enclosure, amplified by la4 or la8 low frequency limit (‑10 db) 40 hz ([sb15_100] preset) maximum spl 1 135 db ([sb15_100] preset) rms power handling 600 w t...