Ies series user manual v. 1.0 ies series industrial ethernet switch user guide model: ies-2205, ies-2206, ies-2208, ies-2216, ies-2210, ies-2220 july, 2011 version：1.0
Ies series user manual v. 1.0 ii notice l-com global connectivity reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases consult l-com global connectivity to determine whether any suc...
Ies series user manual v. 1.0 iii safety provisions please read this user manual thoroughly before installing the ies switch do not place equipment in or around water keep power line connections clear do not let power lines touch or contact each other verify power requirements of all attached device...
Ies series user manual v. 1.0 contents chapter 1 introduction ................................................................................................................................................. 5 1.1 system parameters .......................................................................
Ies series user manual v. 1.0 5 chapter 1 introduction 1.1 10/100tx (100fx) ethernet switches the ies series industrial ethernet switches provide 10/100tx (100fx some models) full duplex ethernet connectivity to ethernet enabled devices in harsh environments. All switches in this series are din rail...
Ies series user manual v. 1.0 6 1.1 system parameters configurations ies-2205 5 10/100tx ies-2208 8 10/100tx ies-2216 16 10/100tx ies-2206-m2 4 10/100tx, 2 100fx multimode 2km ies-2206-s20 410/100tx, 2 100fx single mode 20km ies-2206-s40 4 10/100tx, 2 100fx single mode 40km ies-2206-s60 4 10/100tx, ...
Ies series user manual v. 1.0 7 chapter 2 hardware functionality 2.1 main functions 2.1.1 front panel interfaces the ies series encompasses a variety of port configuration options supporting both copper category rated cabling as well as multimode and single mode fiber optic cabling. The schematic be...
Ies series user manual v. 1.0 8 fig. 2-2 the ies-2206, ies-2208, ies-2216, ies-2210, and ies-2220 all feature redundant power connectors with dual v+ power anodes and v- power cathodes. See figure 2-3. Fig. 2-3 when using only one power supply make sure to connect the supply to the v1+ and v1- termi...
Ies series user manual v. 1.0 9 to connect power to the switch first make sure the ac/dc power supply is not connected to an ac power outlet. Connect the + and – conductors from the ac/dc power supply to the v1+ and v1- terminals respectively. If a redundant dc power configuration is to be used conn...
Ies series user manual v. 1.0 10 chapter 3 hardware installation 3.1 din-rail installation most industrial areas choose 35mm din-rail installation. The din-rail attachment plate is fixed to the rear panel of the ies switch when you take it out of the box. If you need to reattach the plate to the swi...
Ies series user manual v. 1.0 11 chapter 4 support and warranty 4.1 support should you require support for your ies switch please contact the l-com product support team via one of the following methods. __________________________________________________________________________________________ phone ...
