L'Equip 110.5 Instructions Manual - Introduction
Welcome to L’EQUIP, Inc.!
You’re now the proud owner of L’EQUIP’s™ Model 110.5. This juicer was
designed with your convenience in mind- you will appreciate its ease of operation as you
enjoy the delicious and healthy juices it gives you.
Introduction
The L’EQUIP™ Model 110.5 comes almost completely assembled in the box. To
complete the assembly before its initial use, spring loose each side clamp, lift the cover,
lightly press the blade/basket down into place and rotate with your fingers to make
certain its locked down and can move freely. Replace the cover, bring clamps up and
notch over the cover, pressing in and down at the same time. You should hear a click, and
clamps should be secure against the side of the juicer with no free play left. We suggest
taking your juicer apart and washing the removable parts in warm soapy water before its
first use. This will eliminate any traces of dust or residue from manufacturing or
shipping. Washing these parts with any liquid detergent is fine.
“This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, revere the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.”