L.L.Bean bike Assembly Instructions Manual - page 6
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product
11/12/13 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg. 6
To install the seat post to the bike, open the quick release seat clamp or loosen clamp bolt if not a quick release (5-D).
Insert the seat post into the bike’s seat tube past the minimum insertion line. This line is embossed into the lower
portion of the seatpost (5-D). The saddle is adjustable forward and back along the saddle rails and can be angled up or
down. The best starting position is with the saddle horizontal and in the middle of the seat rails (5-E). With the bike on
the ground, find this position and tighten the seat post clamp bolt.
Loosen
seat post
clamp bolt
Position saddle rails
between the seatpost
clamping mechanism
and snug the seat post
clamp bolt
Saddle rails
Top plate
turned for
seat
attachment
5-A
5-B
Correctly
attached saddle
5-C
Open the quick-release
lever of the seat clamp and
slide the seat post into the
seat tube.
Saddle set
horizontal
Seat mounted
correctly
5-D
5-E
Minimum
insertion
line
Seat clamp