1. DL manuals
  2. L.L.Bean
  3. Indoor Furnishing
  4. MISSION STORAGE CONSOLE
  5. Assembly Instructions Manual

L.L.Bean MISSION STORAGE CONSOLE Assembly Instructions Manual

Summary of MISSION STORAGE CONSOLE

  • Page 1

    Mission storage console thank you for purchasing our mission storage console. Assembly of this product requires a phillips screwdriver and a hammer. We have found it helpful to have a second person present in at least one step of the assembly atf4/5062919.

  • Page 2: Drawer Hardware

    Step 1 read through these instructions thoroughly before beginning assembly. We have found this to be of great value when assembling this product. Step 2 remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to preve...

  • Page 3

    Step 5: base assembly lay first side assembly (a) on edge. Align pilot holes in edge of bottom shelf (b) with predrilled holes in uprights of side assembly (a). Secure by threading two 1 1/4" #8 wood screws through holes in side assembly (a) and into pilot holes in end of bottom shelf (b). Do not fu...

  • Page 4

    Step 9 cover screws in center assembly (cd) with wood plugs. Tap plugs gently with hammer to secure. Step 10 turn base assembly (ab) upright. Place 4 wood pins in predrilled holes in bottom shelf (b). Step 11 align pins with predrilled holes in ends of center assembly sides (c) and slide center asse...

  • Page 5

    Step 12 place wood pins into predrilled holes in top of center assembly (cd) as shown. Step 13 have second person assist with aligning predrilled holes in underside of top (e) with pins in top of center assembly (cd). Secure top using four 1 1/4" #8 screws. Thread screws through predrilled holes in ...

  • Page 6

    Step 15 place removable shelves (f and g) on wood pins, ensuring that grooves in underside of shelf engage pins. You may accommodate different sizes of books, etc., by removing shelves and pins. Step 16 attach drawer hardware as shown at right. Place drawer (h) into position in the top section of ce...