L.L.Bean SEASHORE Assembly Instructions - page 4
STEP 7-
Align top reduction of extension legs (8) with bottom of headboard posts. Make sure the 3 holes on extension legs are
perpendicular to headboard panel. Now carefully insert extension legs (8) into bottom of headboard (1) posts.
STEP 8-
Place headboard and frame in desired location in room. Place 2 screws (3) through holes located in leg (8). Align bed
frame bracket over screws. Place a flat washer (6) and a nut (5) on each screw. Hand-Tighten, DO NOT TIGHTEN screws all the
way. Repeat on other side of headboard. Tighten all screws securely using the Allen wrench (7).
STEP 9-
Position footboard panel (2) and align holes in the post with holes in the frame bracket. Place flat washer (6) on each
screw (4). Insert through bracket and into post. Hand-tighten, DO NOT TIGHTEN screws all the way. Repeat on other side of
footboard panel. Tighten all screws securely using the Allen wrench (7).
3 of 4
0FCY7/8/9&FDA10073003