Align series active di user’s guide.
Introduction building upon decades of experience creating studio-quality gear for the stage, the align active di is the embodiment of lr baggs engineering at its highest level and uses the most pristine circuitry we have developed in a di. Our all-discrete design preserves the authenticity of your s...
Top features a. Instrument input the ¼” input is an unbalanced (mono), all-discrete input. Plugging into the input will activate the active di, therefore, unplugging will turn the system off. B. Pad the pad switch is used to adjust the xlr output to 0db (no change), -10db, or -20db. Adjust this depe...
C. Ground lift engage this switch to reduce or eliminate ground loop related noise. D. Phase press this button to invert the phase. Usually, one phase will provide better sound and feedback resistance. With all acoustic instruments it is important to try both phases each time you set up, because pha...
Side features a. Dc input the dc power input is designed for a standard 2mm plug commonly used with effects pedals and “floor- box” products. Most power supplies or multi-power devices designed for musical products may be used. 9vdc recommended with a 12vdc maximum. Plugging in a power supply will a...
Specifications 1/4” input input impedance: 2.2 megohms preamp gain: 0db, -10db, -20db input level: -25dbv to +8.5dbv (0.056vrms to 2.651vrms) frequency response: 20hz – 60khz (-1db point) line output output level: +8.5dbv (2.651vrms) unbalanced output impedance: 470 ohms di out output level: +8.5dbv...
Product registration register the align active di online at: lrbaggs.Com/register product registration & warranty information limited warranty l.R. Baggs warrants to the using purchaser that this product shall be free of defects in workmanship and materials under normal and proper use for a period o...
483 n. Frontage road, nipomo, ca 93444 ph: 805.929.3545 lrbaggs.Com.
