L.R. Baggs ALIGN SERIES User Manual - Side Features
SIDE FEATURES
A.
DC INPUT
The DC power input is designed for a standard 2mm
plug commonly used with effects pedals and “floor-
box” products. Most power supplies or multi-power
devices designed for musical products may be used.
9VDC recommended with a 12VDC maximum. Plugging
in a power supply will activate the Equalizer.
A
systems. The variable “hpf” switches between 40Hz,
80Hz, and 120Hz.
H.
¼” OUTPUT
The ¼” output is an unbalanced, line level output. You
can plug into any amp or device that has a ¼” input. We
recommend running into any other LR Baggs Align
pedals, DI’s, or the Synapse Personal PA System.
I.
VOLUME
The master volume will help you find a balance between
your engaged and bypassed signal. It is only active when
the engage light is on. Keep in mind that your 6-band
EQ controls and gain switch will affect this balance.