User ’s guide.
Package contents one m80 pickup with battery installed one pre-wired strapjack assembly one spare battery one 3/32” allen wrench two spare 3/4” pole pieces one spare 3/8” pole piece two self-stick wire clips one manual one warranty card overvie w and c autions the m80 will fit guitars with soundhole...
Str apjack install ation drill a clean 1/2” hole in the tail-block for the strapjack. Remove dust & debris from inside the guitar. Remove the strap ring, retaining nut and one washer from the end of the jack. Bring the jack through the pre-drilled hole in the tail-block. Using the internal nut, set ...
Active or passive operation the m80 offers you the option of either “active” or “passive” settings, essentially giving you two pickups in one (see figure 2). Active setting - in this setting, the m80 engages a high quality, all-discrete preamp that is specifically tuned to optimize the m80’s perform...
Only two lights are lit, you have about 50 hours of normal playing time left. If only one light is lit, replace the battery (see figure 4). Make sure the “+” sign is facing outwards. Be sure to unplug your instrument cable from the guitar when not in use to maximize battery life. The battery check w...
Register this product online at www.Lrbaggs.Com.
