Session acoustic di user’s guide.
I n t r o d u c t i o n inspired by the lr baggs handcrafted video sessions and our experience in some of nashville’s great studios, session acoustic di brings our signature studio sound to your live rig. The session di enhances your acoustic pickup and imparts the rich sonic character that you’d ex...
T o p f e at u r e s a. Instrument input the ¼” input is an unbalanced (mono), all discrete input. Plugging into the input will activate the session di, therefore, unplugging will turn the system off. Be sure to mute the signal before unplugging from the session di to avoid a loud pop. B. Gain setti...
Turn the control clockwise as you strum the guitar until the vu meter flashes red slightly at your loudest playing level. If red flashes too frequently, the input is clipping and you may experience unwanted distortion. Best results are achieved when the yellow flashes consistently. C. Battery check ...
F. Mute press the footswitch to engage the mute for both the xlr and ¼” outputs. The orange led will light up when the session di is muted. Press the footswitch again to un-mute your signal. G. Notch the notch filter is designed to help control feedback. If your guitar begins to feedback, slowly tur...
S i d e f e at u r e s a. Dc input the dc power input is designed for a standard 2mm plug commonly used with effects pedals and “floor-box” products. Most power supplies or multi-power devices designed for musical products may be used. 9vdc recommended with a 12vdc maximum. B. Hpf (high pass filter)...
S p e c i f i c at i o n s 1/4” input input impedance: 10 megohms preamp gain: -12db to +26db input level: -25dbv to 1.8dbv (0.53vrms to 1.23vrms) di output output level: -1dbv (0.88vrms) balanced output impedance: 470 ohms line output output level: -1dbv (0.88vrms) unbalanced output impedance: 470 ...
P r o d u c t r e g i s t r at i o n & w a r r a n t y i n f o r m at i o n register the session di online at: www.Lrbaggs.Com/product-registration limited warranty l.R. Baggs warrants to the using purchaser that this product shall be free of defects in workmanship and materials under normal and pro...
