L.R. Baggs Venue D.I. User Manual - page 8
B
C
D
E
F
G
A
H
R E A R A N D S I D E P A N E L S
A . I n p u t
The 1/4” input, located on the upper right side of the unit, is an unbalanced (mono) all
discrete input with a 10 megaohm impedance. It can be used with almost any passive
or active pickup or pickup system. Plugging into the input will turn the system on,
therefore unplugging will turn the system off . Before unplugging from the Venue D.I. be
sure to mute the sound system or amplifi er, or a loud pop will occur.
B. E F X S e n d
Connect a standard 1/4” mono cable from this jack to the input of an eff ects pedal or
rack device.
C . E F X R e t u r n
Connect the return of the output of an eff ects pedal or rack device to interrupt the signal
and complete the series eff ect loop.