Im range of passive and active speakers owners manual and instruction guide.
Thank you for choosing the l2 audio pa im/imp professional speaker enclosure. We’re confident that your purchase will give you years of service and the high quality of sound reproduction that our customers have come to expect. We pride ourselves in designing the right product for the right applicati...
Introduction this manual is designed to help you get the most out of your l2 audio im/imp speaker enclosure. The im range refers to passive or un powered speakers. These will need an external amplification source. The imp range refers to active or powered speakers. These speakers have built in ampli...
1. Xlr/jack input and output sockets, electronically balanced. The in xlr socket allows connection of a low level signal source such as a microphone. The out xlr is parallel and can be used as an output to link to another speaker into the jack line in (2) (jack only on imp8) 2. Line. Input is a ¼” j...
Specification im8h im10h im12h im15h frequency range 60hz-18khz 60hz-18khz 45hz-18khz 40hz-18khz power capacity (rms) 100 watts 200 watts 300 watts 400 watts impedance 8 ohms 8 ohms 8 ohms 8 ohms sensitivity (@1w1mt) 93db 94db 96db 97db dispersion 90º x 60º 90º x 60º 90º x 60º crossover frequency 2....
Warranty terms and conditions 1. L2 audio is exclusively distributed by the mgd group limited (hereinafter referred to as ‘mgd’) 2. Mgd or any mgd authorised agent warrant that the products supplied are free from defective material or workmanship. This warranty is for a period of one year from date ...
E&oe.
