Digiboxes user guide december 2003 rev 1.
Digibox range model page aes-s3 3 way aes splitter……………………….. 1 aes-d2 2 way aes channel divider……………... 3 aes-spd aes - s/pdif converter………………… 5 spd-s4 4 way s/pdif splitter …………………… 7 clk-d4 4 way word / super clock distributor.… 9 clk-c4 4 way word / super clock converter….. 11 clk-g4 word / sup...
Aes-s3 (aes splitter): why use an aes/ebu splitter: because of the high frequency content of an aes/ebu digital signal, the connection between a transmitter and receiver needs to be that of a transmission line. This means the cable must have a characteristic impedance equal to the output impedance o...
Aes-s3 connections input one aes/ebu xlr female outputs three aes/ebu xlr male specifications one transformer balanced input on xlr female input impedance = 110 ohms three transformer balanced outputs on xlr male output impedance = 110 ohms sample rate : up to 96khz jitter : 2.
Aes-d2 (aes/ebu channel divider): why use an aes/ebu channel divider: the aes/ebu digital signal contains two audio channels (left & right, also called a & b or 1 & 2) on the same transmission line. In some applications you may need a mono signal. The aes-d2 enables you to extract a mono signal from...
Aes-d2 connections input one aes/ebu xlr female outputs two aes/ebu xlr male specifications one transformer balanced aes/ebu input on xlr-f. Input impedance: 110 ohms two buffered transformer balanced aes/ebu outputs on xlr-m. Output impedance: 110 ohms channel selection on each output: aa, ab, bb, ...
Aes-spd (aes/ebu s/pdif converter): why use an aes/ebu s/pdif converter: often, it is necessary to connect a professional device (aes/ebu) with some semi-pro or home studio equipment (s/pdif) or vice versa. The aes-spd solves this problem. Also all outputs are available simultaneously. Using the aes...
Aes-spd connections inputs one aes/ebu xlr female one coax s/pdif phono (rca) one optical s/pdif tos-link outputs one aes/ebu xlr male two coax s/pdif phono (rca) two optical s/pdif tos-link specifications: aes transformer balanced input on xlr-f aes input impedance: 110 ohms one buffered transforme...
Spd-s4 (s/pdif splitter): why use an s/pdif splitter: because of the high frequency content of an s/pdif digital signal, the connection between a transmitter and receiver needs to be that of a transmission line. This means the cable must have a characteristic impedance equal to the output impedance ...
Connections inputs one coax s/pdif phono (rca) one optical s/pdif tos-link outputs four coax s/pdif phono (rca) three optical s/pdif tos-link specifications one s/pdif input on phono (coaxial) input impedance: 75 ohms one tos-link input (optical) connector four buffered coaxial outputs on phono outp...
Clk-d4 (clock distributor): why use a clock distributor: because of the high frequency content of a word clock signal (even higher with super clock), the connection between a transmitter and receiver needs to be that of a transmission line. This means the cable must have a characteristic impedance e...
Connections inputs one clock input bnc four clock outputs bnc specifications: input on bnc. Input impedance : 75 ohms or open buffered output on bnc. Output impedance : 75 ohms jitter: 10
Clk-c4 (clock converter): why use a clock converter: when working in a studio or on a project where both word-clock and super-clock equipment is being used it will be necessary to synchronise the two standards. The clk-c4 solves this problem by its ability to automatically detect and lock onto which...
Connections inputs one clock input bnc four clock outputs bnc specifications: input impedance : 75 ohms or un-terminated output impedance : 75 ohms led indication of word-clock or super-clock input led indication of word-clock to super-clock lock jitter: 12.
Clk-g4 (clock generator) : why use a clock generator: a clock generator is used to synchronise equipment in a digital audio environment. Most master clock generators on the market also synchronise with video for post production, this can make a master clock very expensive. For applications which do ...
Connections output a two clock outputs bnc output b two clock outputs bnc specifications: four buffered outputs on bnc output impedance : 75 ohms sample rate : 44.1 / 48 / 88.2 / 96 khz precision & stability : +/- 3.5 ppm jitter : 14.