Distribution unit user guide.
Page 2 contents 1. Introduction page 2 2. Technical specifications page 3 3. Installation 3.1 inspection and un-packing page 4 3.2 operating environment page 4 3.3 power requirements & line voltage switch page 4 4. Description of controls page 5 5. Warranty page 6.
Page 3 1.0 introduction the da82 is a compact distribution amplifier, configurable for mono (1x8) or stereo (2x4) operation. Each input and output is switchable between calibrated and uncalibrated mode, allowing instant adjustment of input sensitivity and output level. All inputs and outputs are ele...
Page 4 2.0 technical specifications electrical input impedance 20kΩ balanced maximum input level +20dbu input gain adjustable -6 to +6db output impedance 75Ω balanced recommended output load 600Ω to infinity maximum output level +20dbu output gain adjustable -12 to +6db frequency response 20hz to 20...
Page 5 3.0 installation important: please read this section before using the da82 3.1 inspection and unpacking the da82 has been carefully packed at our factory in a carton designed to withstand handling in transit. Should the unit appear to have been damaged in transit, do not discard any of the pa...
Page 6 4.0 description of controls 1. Cal/uncal switch. Switches gain control between pot and trimmer adjustment. 2. Cal trimmer adjustment for input gain, ranging from –6 to +6db. Requires a flat-bladed screwdriver. 3. Uncal potentiometer adjustment for input gain, ranging from –6 to +6 db. 4. Ster...
Page 7 5.0 warranty your la audio da82 has been manufactured to a high standard using quality components. If correctly installed and operated the unit should give years of problem free operation. However in the event of a defect in material or workmanship causing failure of the unit within one year ...
