La Crosse 1910 Quick Setup Manual

1 

QUICK SET UP MANUAL –  

WEATHER CENTER 

Using 915MHz wireless transmission of weather data, this unique weather station can be 

powered using batteries for all your weather needs in the home or office. 

Carefully open and check that the following contents are complete: 

Item: Consisting 

of: 

Fittings: 

Illustration: 

Base 

Station 

1) Main 

unit 

Thermo-

Hygro 

Sensor 

(TX31U-IT) 

1) Main 

unit 

2) Rain 

protection 

cover 

1) Wall 

mounting 

screws 

2)  Plastic anchors for 

screws 

3)  2 x cable ties 

INSTANT TRANSMISSION is the state-of-the-art 

new wireless transmission technology, 

exclusively designed and developed by LA 

CROSSE TECHNOLOGY. INSTANT 

TRANSMISSION offers you an immediate update 

(every 4.5 seconds!)  (every 6.25 seconds for 

rain optional)  of all your outdoor data measured 

from the transmitters: follow your climatic 

variations in real-time! 

This product offers: 

2

Cable connection between the wind sensor and 

the thermo-hygro transmitter 

OPTIONAL 

Wireless transmission 

at 915 MHz – Self-

Emptying Rain sensor 

to weather station 

Wireless transmission at

915 MHz - thermo-hygro

transmitter to weather

station

Weather Center

Wind sensor

Rain sensor (sold separately )

Thermo-hygro 

transmitter 

Wind 

Sensor 

(TX55U-IT) 

1) Main 

unit 

with wind 

vane 

2) 32ft 

cable 

(already 

attached the 

main unit) 

3) Mast 

holder 

1)  1 x U-bolts for 

mast holder 

2) 2 

x 

Washers 

3)  2 x Nuts 

4)  2 x cable ties 

SETTING UP:

Note: 

When putting the Weather Station into operation, it is important 

to perform in close proximity (e.g. on a table) a complete wiring 

and set-up of the system. This step is important to test all 

components for correct function before placing and mounting 

them at their final destinations (See Positioning below): 

Socket for wind 

sensor