La Crosse 308-2316 Quick Setup Manual - High Alarms:
Model: 308-2316 www.lacrossetechnology.com/support Page | 7
ALARM MODE- Do not press any buttons for 30 second to start from
normal display mode.
1. Press the ALARM button once to enter HI Alarm mode (HIAL will
show in the date display). Press twice to enter LO Alarm mode.
(LOAL will show in the date display).
2. Press the SET button to select an alarm value to change.
3. Press the
+
or MIN/MAX buttons to adjust the values.
4. After adjusting alarm values press the ALARM button to activate or
deactivate individual alarms.
High Alarms:
• Time alarm (hour then minutes)
• Indoor humidity high alarm
• Indoor temperature high alarm
• Outdoor humidity high alarm
• Outdoor temperature high alarm
• Wind chill high alarm
• Dew point high alarm
• Pressure high alarm
• Wind speed high alarm
• Gust speed high alarm
• 1 Hour rain high alarm
• 24 hour rain high alarm
Low Alarms:
• Time alarm (hour then minutes). This is the same as Hi Alarm for the
time alarm. There is only one time alarm.
• Indoor humidity low alarm
• Indoor temperature low alarm
• Outdoor humidity low alarm
• Outdoor temperature low alarm
• Wind chill low alarm
• Dew point low alarm
• Pressure low alarm
Activate/Deactivate Hi and Low Alarms:
1. Press the ALARM button to enter HI Alarm or LO Alarm mode. (HIAL
or LOAL will show in the date display).
2. Press the SET button to select an alarm value to change.
3. With alarm value flashing, press the ALARM button to activate or
deactivate individual alarms.
4. When active (ON) the alarm icon will show.
5. When the alarm is inactive (OFF) the alarm icon will not show.
When an alarm sounds and flashes:
Active
Alarm
Icon