La Crosse 519-1416 Instruction Manual - page 4
Model: 519-1416 www.lacrossetechnology.com/support Page | 4
Seconds
Month
Date
Year
Program menu buttons:
1. Hold the MODEbutton to enter time set mode.
2. To adjust values press the DOWN or UP buttons (on top).
3. Press the MODE button to confirm adjustments and move to the next item.
4. Press MODE to exit, or wait 30 seconds without pressing buttons to return to the normal time display.
WWVB Reception ON/OFF
The WWVB time reception defaults to ON. To turn the WWVB reception OFF:
1. Hold the MODE button for 5 seconds.
2. WWVB will show after the time and ON will flash above the time.
3. Press and release the DOWN or UP buttons to turn this OFF.
4. Confirm with the MODE button and move to the Time Zone.
Note: When you select WWVB OFF, Time Zone and DST disappear from the time setting order.
Time Zone
This clock offers seven time zones listed in letter format (default is EST):
1. EST will flash.
2. Press and release the DOWN or UP buttons to select a different Time Zone.
3. Confirm with the MODE button and move to Daylight Saving Indicator.
Daylight Saving Time Indicator ON/OFF
DST will default to the ON position as most of the country observes the DST change. If you live in an area does
not observe the DST change, switch this to the OFF position.
1. DST will show after the time and ON will flash above the time.
2. Press and release the DOWN or UP buttons to turn DST to OFF.
3. Confirm with the MODE button and move to 12/24 hour time format.
12-hour or 24-hour Time Format
The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
1. Hold the MODE button for three seconds to enter time set mode.
2. 12H will flash.
3. Use the UP OR DOWN buttons to choose 12-hour or 24-hour time format.
4. Press the MODE button to confirm and move to set time.
Set Time
To set the time manually:
1. The
Hour digit will flash.
2. Use the UP OR DOWN buttons to choose the hour.
3. Press the MODE button to confirm and move to minutes.
4. The
Minutes will flash.
5. Use the UP OR DOWN buttons to choose the minutes.
6. Press the MODE button to confirm and move to seconds.
7. The
Seconds will flash.