La Crosse 616-1908v2 Quick Setup Manual - page 4
Model: 616-1908 www.lacrossetechnology.com/support Page | 4
PROJECTION (rotate, projection arm)
Battery Power: Press and release the SNOOZE/LIGHT
button to show the projection for 10 seconds.
Micro-USB Cord: Projection is displayed constantly.
Note: Projection will not display constantly when operating on battery
power.
Rotate Projection:
Press the
▲UP button to rotate the projection image 90 degrees.
Press the
▲UP button again to rotate another 90 degrees.
Continue until the projected image is right side up.
Projection Arm: The projection arm will move forward or backward
so you can project on the wall or ceiling.
USB CHARGE PORT
Charge your mobile device when the clock is plugged into a USB
outlet with the Micro-USB cord. You cannot charge mobile devices
when operating the clock on battery power only.
Option 1:
Use the included Micro-USB cord to connect the clock to a USB
power outlet or your computer.
Connect your mobile
device’s USB charging cable (not included)
to the USB charging port.
Charging times will vary.
USB Power Output: 1.0A maximum current. Charge 1.0A devices
or devices that are self-regulating.