La Crosse 617-1270 Instruction Manual - page 3
Model: 617-1270 www.lacrossetechnology.com/support Page | 3
Reset Button
If the clock display appears distorted or is not responding to
buttons, use a pen or paperclip to press RESET one time.
This will reset the clock to default settings.
Moon Phase
The moon phase is based on the month, date
and year set.
Manual WWVB Time Signal Search
Press the WAVE button to start or stop a manual WWVB signal
search.
For information about WWVB, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
After the initial search, this clock will only search for the atomic signal after
midnight.
Backlight
Press the SNOOZE/LIGHT or SNZ button to activate the backlight for 5
seconds.
Specifications
Temperature Range:
+32°F to +122°F (0°C to 50°C)
Power:
2-AAA, IEC, LR3 batteries (not included)
Battery Life:
Battery life is over 12 months
Dimensions:
3.106” H x 4.761” W x .835” D
(78.892 x 120.929 x 21.209 mm)
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed with correct polarity (+and -).
Remove batteries from equipment which is not to be used for an extended period.
Remove expired batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring agents.
The clock is not a toy. Keep it out of reach of children.
The clock is not to be used for medical purpose or for public information. It is intended
for home use only.
WWVB
Icon