Ir 101 infrascan ™ infrared thermometer instruction manual.
2 table of contents page general quick instructions 3 equipment supplied 3 description of measuring principle 3 operation display and operator controls 4 making a measurement 4 minimum and maximum temperature indication 5 changing the temperature units 5 back light 5 measurement inaccuracies 5-6 tro...
3 general 1. Quick instructions press and hold the operating button for more than 1.5 seconds. The temperature of the surface the lens is aimed at will read on the top of the display. The minimum and maximum temperatures of the current measurement are shown on the bottom of the display. When the ope...
4 7 3 2 1 6 5 4 8 operation 1. Display and operator controls all of the functions of the measuring unit are controlled and monitored using the operating button (7) and the back lit display. A. Temperature display - currently measured value b. Hold indicator c. Temperature display - minimum value d. ...
5 the lower right hand part. These values each apply to the current measuring cycle and are cleared as soon as the button is pressed again. 4. Changing the temperature units ( °f/°c ) the units for the temperature display can be switched between degrees celsius ( °c) and degrees fahrenheit (°f) by p...
6 the surface will increase the emission factor and reduce the inaccuracy of the measurement. D. It is not possible to take measurements through transparent materials (glass, plexiglas, etc.). E. It is not possible to measure air temperatures. F. Measurement errors can occur due to air contaminated ...
7 2. Cleaning clean the unit using only a dry cloth. If the unit is very dirty, the cloth may be slightly dampened. Do not use cleaners containing solvents. Make sure that no moisture enters the interior of the unit. When cleaning the lens, loose particles must be removed using compressed air. Any r...
8 distance to measuring spot size d:s : 6:1 ambient temperature range : 32 °f to 104°f emission factor : 0.95 power supply : 4 x lr44 button cell batteries battery life (approx.) : 2000 measurements (depending on the usage) dimensions (l”xw”xh”) : 2.25” x 1” x 4” 3. Emissions factor: the physical qu...
9 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to the...
10 for warranty work, technical support, or information contact: la crosse technology, ltd 2809 losey blvd. S. La crosse, wi 54601 phone: 608.782.1610 fax: 608.796.1020 e-mail: support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) web: www.Lacros...
