La Crosse Technology 308-1414M Instruction Manual - page 2
Model: 308-1414M www.lacrossetechnology.com/support Page | 2
GET STARTED
Step 1: Insert the included 5-volt AC power adapter into the
weather station and then into wall outlet.
Step 2 (Optional): Insert 3 new “AAA” batteries (not included)
into the weather station. Observe the correct polarity.
Step 3: Insert 2 new “AA” batteries (not included) into
TX141TH-Bv2 sensor. Observe the correct polarity.
The red LED will flash when transmitting.
Step 4: After 5 minutes, place the sensor in a shaded outdoor
location.
SET TIME, DATE AND TEMPERATURE UNITS
1. Hold the TIME SET button to enter time set mode.
2. Press the ▼ or ▲ buttons to adjust the values. Hold for fast
adjustment.
3. Press the TIME SET button to confirm adjustments and
move to the next item.
Settings order:
1. WWVB ON/OFF
2. Time Zone
3. Daylight Saving Indicator ON/OFF
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
10. Fahrenheit/Celsius
Press the TIME SET button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
SET TEMPERATURE ALERTS
1. Hold the ALERTS button until the station beeps.
2. The temperature alert value will blink in set mode.
3. Press the ▼ or ▲ buttons to adjust the temperature
alert value.
4. Press the ALERTS button to confirm. Next, arm the
temperature alerts (see below)