La Crosse Technology 513-149 Instruction Manual

Summary of 513-149

  • Page 1

    1 introduction: the digital atomic wall clock features radio-controlled time, date, indoor and outdoor temperature on an easy to read display. Receives signal from the atomic clock in colorado, for accurate time. Digital atomic wall clock outdoor temperature transmitter tx14 digital atomic wall cloc...

  • Page 2

    2 table of contents: introduction 1 digital atomic clock 1 outdoor transmitter tx14 1 table of contents 2 features 3 intial setup 3 wwvb radio controlled time 3 wwvb reception icon 3 manual search 3 button functions 4 program menu 4 wwvb reception on/off 4 time zone 4 dst indicator 4 12/24-hour time...

  • Page 3

    3 features: wireless outdoor temperature (°f or °c) with trend arrow monitors indoor temperature (°f or °c) with trend arrow atomic time and date with manual setting automatically updates for daylight saving time (on/off option) time display (hour / minute) perpetual calendar (month / date / weekday...

  • Page 4

    4 button functions: button press and release functions hold 2 seconds °f/°c move through program menu (setup) select temperature in °f/°c enter program menu, set time, date, etc. (setup) + 1 step forward (setup) search for outdoor transmitter fast advance (setup) - 1 step backward (setup) fast backw...

  • Page 5: 12:34

    5 12 or 24 hour time format: the time may be displayed in 12-hour or 24-hour format. Default is 12-hour time. Note: when in 12-hour format am or pm will show in front of the hour. 1. 12h will flash. 2. Press and release the + or - button to select 24-hour time. 3. Confirm with the °f/°c button and m...

  • Page 6

    6 alarm activation icon: press and release the alarm button once to show alarm time. With the alarm time showing, press and release the alarm button to activate the alarm. The alarm icon appears when alarm is activated. With the alarm time showing, press and release the alarm button to deactivate th...

  • Page 7

    7 install batteries in the digital atomic clock: 1. Remove battery cover: slide tab to the down and pull out to remove battery cover. 2. Install two fresh aa batteries according to the polarity markings. Do not mix old and new batteries do not mix alkaline, lithium, standard, or rechargeable batteri...

  • Page 8

    8 wall mount  choose a shaded location (under an overhang) for the transmitter that is within the confirmed wireless reception range of the digital atomic clock for accuracy.  install one mounting screw (not included) into a wall leaving approximately ½ of an inch (12.7mm) extended.  place the ha...

  • Page 9

    9 accuracy: indoor temperature: 1) measure range=32 ℉ to 140℉ (0℃ to 50℃) 2) accuracy ±1 degree fahrenheit at room temperature (68 ℉ to 75℉)(20℃ to 24℃) 3) accuracy ±2 degrees fahrenheit 32 ℉ to 122℉ (0℃ to 50℃) 4) resolution=0.1 ℉ or 0.1℃ 5) when above 122 ℉ (50℃) the temperature should continue to...

  • Page 10

    10 for warranty work, technical support, or information contact: la crosse technology, ltd 2817 losey blvd. S. La crosse, wi 54601 the complete instruction manual is available at: www.Lacrossetechnology.Com/k86302 protected under u.S. Patents: 5,978,738 6,076,044 6,597,990 contact support: 1-608-782...