1. DL manuals
  2. La Crosse Technology
  3. Carbon Monoxide Alarm
  4. 616-146
  5. Instruction Manual

La Crosse Technology 616-146 Instruction Manual

Other manuals for 616-146: Instruction Manual
Manual is about: Atomic Projection Alarm with Indoor and Outdoor Temperature

Summary of 616-146

  • Page 1

    1 atomic projection alarm with indoor and outdoor temperature this atomic projection alarm with snooze alarm and backlit display projects time and outdoor temperature on your wall or ceiling in a variety of ways. It automatically sets the time and date based on your time zone, and even updates dayli...

  • Page 2

    2 table of contents atomic projection alarm 1 initial setup 1 restart 2 table of contents 2 features 3 power the projection alarm 3 a/c adapter 3 batteries 3 install batteries in the tx141 transmitter 4 install batteries in the tx14 transmitter 4 functions buttons 4 program menu 5 wwvb reception on/...

  • Page 3

    3 features projects time & outdoor temp. On wall or ceiling projection rotates in 90 degree increments projection options: (1) default: toggle between time and temp., (2) time only, or (3) temperature only time zones: atlantic time (ast), eastern time (est), central time (cst), mountain time (mst), ...

  • Page 4

    4 atomic signal search: the lcd backlight, projection and usb charging port will momentarily turn off while the station searches for the atomic signal. After the initial search, this station will only search for the atomic signal after midnight. Install batteries in the tx141 transmitter note: this ...

  • Page 5

    5 snooze/light hi/low/off once: backlight and projection low intensity (a/c) twice: backlight and projection off (a/c) third time: backlight and projection on high intensity (default, a/c adapter) battery power: activate backlight for 10 seconds trigger snooze alarm (ringing) program menu the set bu...

  • Page 6

    6 1. 12h will flash. 2. Press and release the +/temp or -/time buttons to select 24-hour time. 3. Confirm with the set button and move to set time. Set time to set the time manually: 1. The hour digit will flash. 2. Press and release the +/temp or -/time buttons to select the hour. 3. Press and rele...

  • Page 7

    7 snooze 1. When the alarm sounds, press the snooze/light button to trigger snooze alarm for 10 minutes. The snooze icon zz will flash when the snooze feature is active. 2. To stop alarm for one day, press alarm button, while in snooze mode. The alarm icon will remain solid. Note: when the alarm sou...

  • Page 8

    8 usb charge port charge a smart phone, camera or other devices when the forecast station is plugged into a power outlet with the included 5v ac adapter. Note: this is a power-output charging port. It does not supply power to the projection alarm. Connect your external device’s usb charging cable (n...

  • Page 9

    9 reposition the display for better signal reception or try again at bedtime. The display will start searching at utc: 07:00 and if no reception on the first attempt they will try again at 08:00, 09:00 and 10:00. Each attempt will be at least 2 minutes and the most will be 10 minutes. If there is no...

  • Page 10

    10 to achieve a true temperature reading, mount where direct sunlight cannot reach the outdoor transmitter. Mount the outdoor transmitter on a north-facing wall or in any well shaded area. Under an eave or deck rail work well. The maximum transmitting range in open air is over 200-feet (60 meters). ...

  • Page 11

    11 care and maintenance do not mix old and new batteries do not mix alkaline, standard, lithium or rechargeable batteries do not expose the projection alarm to extreme temperatures, vibration or shock. Keep projection alarm dry. Clean the projection alarm with a soft damp cloth. Do not use solvents ...