1 introduction the atomic projection alarm features radio-controlled time, indoor temperature, and moon phase on a simple, and easy to read display. Time and/or indoor temperature can be projected on a wall or ceiling. Use the integrated usb charging port to charge your will charge your smart phone,...
2 table of contents: introduction 1 atomic projection alarm 1 features 3 initial setup 3 power the atomic projection alarm 3 a/c power adapter 3 batteries 4 wwvb radio-controlled time 4 wwvb reception icon 4 manual signal search 4 function buttons 5 program menu 5 wwvb on/off 5 time zone 6 daylight ...
3 features projects time & indoor temp. On wall or ceiling projection rotates in 90 degree increments projection options: (1) default: toggle between time and indoor temp., (2) time only, or (3) indoor temperature only time zones: atlantic time (ast), eastern time (est), central time (cst), mountain...
4 batteries: 1. Remove battery cover: slide tab to the up and pull out to remove battery cover. 2. Install two fresh aaa batteries according to the polarity markings. Do not mix old and new batteries do not mix alkaline, lithium, standard, or rechargeable batteries if the atomic projection alarm doe...
5 note: in case the atomic projection alarm is not able to detect the wwvb-signal (disturbances, transmitting distance, etc.), the time and date can be manually set ( see “program menu”). Function buttons button press and release functions hold 3 seconds set/°f/°c move through program menu (setup) s...
6 time zone this station offers seven time zones listed in letter format (default is est): ast atlantic time est eastern time cst central time mst mountain time pst pacific time akt alaskan time hat hawaiian time 1. Est will flash. 2. Press and release the +/proj on/off or -/time search buttons to s...
7 fahrenheit/celsius: 1. Press and release the set/°c/°f button once to switch from fahrenheit to celsius. Alarm set: hold the alarm button for 5 seconds to enter the alarm time set mode. 1. The alarm hour digit will flash. 2. Press and release the +/proj on/off or -/time search buttons to select th...
8 o time and indoor temperature: alternate every 5 seconds (default) o time: hold and release projection button note: both time and indoor temperature will not show at the same time projection arm rotation: the projection arm can be rotated 180 degrees to view the projection on the wall or ceiling. ...
9 full moon occurs when the earth, moon, and sun are in approximate alignment, with the moon and the sun on opposite sides of the earth. The illuminated portion of the moon faces the earth, giving us complete visibility of one side of the entire moon. After a full moon the illuminated portion will d...
10 accuracy i ndoor t emperature : operating temperature range = 32 f to 122 f (0c to 50c) accuracy ± 2 degrees fahrenheit 32 f to 122 f (0c to 50c) resolution = 0.1 degree f warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defec...
11 for warranty work, technical support, or information contact: la crosse technology, ltd 2817 losey blvd. S. La crosse, wi 54601 the complete instruction manual is available at: www.Lacrossetechnology.Com/616-146a contact support: 1-608-782-1610 product registration: www.Lacrossetechnology.Com/sup...
