La Crosse Technology 8117IT Instruction Manual

Manual is about: ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND MOON PHASE

Page of 9

Download

Print this page

Bookmark us

INSTANT TRANSMISSION is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4 seconds!) of all your outdoor data

measured from the transmitters: follow your

climatic variations in real-time!

WS-8117U-IT

ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

AND MOON PHASE

Instruction Manual

FEATURES:

ATOMIC CLOCK:

LCD2

display

Battery cover

Function keys

LCD1

display

Hanging holes

Foldable stand

This product offers:

Holder

•

WWVB Radio controlled time with manual time setting

•

12/24 hour time display

•

Time display: hour, minute, second

•

Alarm setting with snooze function

• Calendar

display

•

Weekday display (4 languages to choose from: English, French, Spanish, and German)

• Time

zone

setting

•

Daylight savings time ON/OFF option (DST)

•

ºC or ºF temperature display selectable

•

Indoor temperature display

•

Outdoor temperature display via 915MHz transmission

•

Wall mount or freestanding

•

Current moon phase display

OUTDOOR TEMPERATURE SENSOR:

•

Remote transmission of outdoor temperature to the

atomic clock by 915 MHz signals

• Wall

mounting

case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow

the steps below:

Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace

compartment

cover.

DO NOT SET THE CLOCK.

1 2 3 4 5 6 7 Next › »

Summary of 8117IT

Page 1
1 instant transmission is the state-of-the-art new wireless transmission technology, exclusively designed and developed by la crosse technology. Instant transmission offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variat...
Page 2
3 to install and replace batteries in the temperature sensor the sensor uses 2 x aa,1.5v batteries. To install and replace the batteries, please follow the steps below: 1. Remove the cover. 2. Insert the batteries, observing the correct polarity (see marking inside battery compartment). 3. Replace t...
Page 3
5 • year setting • month setting • date setting • weekday setting • 12/24 hour time display setting • ºc or ºf setting time zone setting after entering the manual setting mode as described above, the time zone can be set between the +12 to –12 hour or greenwich mean time (gmt) range in lcd2. To do t...
Page 4
7 month setting 1. The month digits on lcd2 will start flashing. Set the desired month by use of the + key. 2. Press and release the set key to move to the mode “date setting”. Date setting 1. The digits for the date will start flashing on lcd2 (default setting 1). Set the desired date by use of the...
Page 5
9 3. Using other electrical products such as headphones or speakers operating on the same signal frequency (915mhz) may prevent correct signal transmission and reception. 4. Neighbors using electrical devices operating on the 915mhz signal frequency can also cause interference. Note: when the 915 mh...
Page 6
11 positioning before permanently mounting ensure that the atomic clock is able to receive wwvb signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the atomic clock, and changes in elevation will result with inaccurate temperatures reading...
Page 7
13 5) position the remote temperature sensor in the desired location, ensuring that the atomic clock can receive the signal. Note: mounting with adhesive tape is not recommended as a permanent mounting solution. Only use the adhesive tape during set-up process. Troubleshooting problem: the lcd is fa...
Page 8
15 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to th...
Page 9
17 fcc id: omotx29u (sensor) rf exposure mobile: the internal / external antennas used for this mobile sensor must provide a separation distance of at least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction with any other antenna or sensor." statement according...