La Crosse Technology C84428 Instruction manual - Factory Reset C84428

Page | 18

Professional Remote Monitoring Station

Factory Reset C84428

A factory restart of your station will remove all sensor ID numbers and Wi-Fi settings and return it to its default 

settings and “out of the box” condition. This may resolve connection issues with your sensor s or Wi-Fi.

1. Hold the RAIN and LIGHT button together for 5 seconds.

2. Your station will reset and search for all sensors.  

3. Allow up to 3 minutes to reacquire all sensors.

4. You will need to reconnect to your La Crosse View™ app by following the steps on

page 4.

Detailed Sensor Set Up and Mounting

LTV-W1 Wind Speed Sensor

1. Turn the battery cover of your wind sensor left.

2. Install fresh “C” batteries.

3. Carefully align and turn battery cover right to tighten.

4. There is a blue LED light on the sensor that will flash when transmitting.

Mounting:

• Position in an open area that will have the least amount of interference with wind speed.

• Mount your sensor vertically with the wind cups on top.

• The maximum wireless transmission range to the station is up to 400 feet (121 meters) in open air, not 

   including walls or trees.

1. Use screws through the bottom of the mounting bracket to attach. 

2. Insert bottom of pole into mounting bracket. Tighten knob to secure

3. Insert the included mounting pole into your sensor.

4. Tighten screws.

Alternatively:

1. Insert your own mounting pole (up to 1.179”) into the sensor.

2. Tighten screws

Twist 

Left

Side Mount

Option

LED

Light

Wind Cups

Battery 

Cover

Mounting

 pole

Mounting 

Bracket

Knob

C

C

Screws