La Crosse Technology C87030 Instructional Manual - Search For Outdoor Sensor

Search for Outdoor Sensor

• Hold the HEAT/DEW button for 3 seconds to search for sensors.

• The strength signal icon will animate until the sensor signal is received or for 3   

  minutes if no signal available.

Change Channels (when using multiple sensors)

From normal time display, press the      button to change channels.

Channel 1, 2, or 3 will show.

Remote Sensor Channels — Auto Scroll:

•Press the      button to toggle between remote 

   sensor channels when multiple sensors are used. 

•The station will automatically rotate through the

   channels for all connected sensors.  

•Press and release the      button to lock the station 

  into one channel. Then view channels individually 

  with a press of the      button.

Low Battery Icon

The Low Battery Icon indicates when batteries are in the station or sensor.

• If the icon is displayed in the outdoor section, replace the batteries in the 

  outdoor sensor.

• If the icon is displayed in the indoor section, replace the batteries in the 

  forecast station.

Model: C87030/C87214      www.lacrossetechnology.com/support       Page | 12

Heat Index Dew Point:

Outdoor Sensor Positioning

• Mount the outdoor sensor on a north-facing wall or in any well-shaded area.   

  Under an eave or deck rail is preferred. 

• The maximum wireless transmission range to the forecast station is over 300 

   feet (91 meters) in open air; this does not include barriers such as walls or floors.

• Be sure the outdoor sensor is mounted vertically. 

• Press the HEAT/DEW button once to view heat index.

• Press again to view dew point.

• Press the     button to change channels.