La Crosse Technology TX29U-IT Instruction Manual

Other manuals for TX29U-IT: Instruction Manual
Manual is about: WIRELESS WEATHER STATION

Summary of TX29U-IT

  • Page 1

    1 wireless weather station with advanced forecast icon instruction manual contents language page _____________________________________________________________ english 1 2 table of contents topic page inventory of contents 3 features 4 setting up 6 about wwvb 11 function keys 12 lcd screen 15 manual ...

  • Page 2

    5 dst on/off (daylight saving time) time zone option ±12 hours year, month, date, weekday calendar display crescendo alarm with snooze function advanced weather forecast icons with 15 combinations of weather icons  weather tendency indicator temperature display with min/max records and time and dat...

  • Page 3

    9 8. In order to ensure sufficient 915 mhz transmission however, this should under good conditions be a distance no more than 330 feet (100 meters) between the final position of the weather station and the transmitter (see notes on “positioning” and “915 mhz reception”). 9. Once the remote temperatu...

  • Page 4

    13 set key (setting): toggle between month, day, & year; weekday, month, & day; seconds; & alarm time press and hold to enter manual setting modes: lcd contrast, time zone, daylight saving time on/off, time reception on/off, 12/24 hour display, manual time set key min/ max key alm key ch/ + key snoo...

  • Page 5

    17 manual settings: the following manual settings can be done in the setting mode:  lcd contrast setting time zone setting daylight saving time (dst) on/off time reception on/off setting  12/24-hour setting manual time setting calendar setting (year, day, & month) sunrise/ sunset city location  s...

  • Page 6

    21 12/24 hour time display setting the hour display can be selected to show hours in 12-hour or 24-hour settings. (default 12-hour). 1. Use the ch/+ key to toggle between 12h or 24h 2. Confirm with the set key and enter the manual time setting. Note: when 24h mode display is selected, the calendar f...

  • Page 7

    25 hawaii far fargo sat san antonio hnl honolulu nebraska utah iowa lnk lincoln slc salt lake city dsm des moines sny sidney virginia dvn davenport new hampshire lyh lynchburg idaho con concord orf norfolk boi boise new jersey vermont illinois ttn trenton btv burlington ord chicago new mexico washin...

  • Page 8

    29 alarm setting: alarm icon flashing press the snooze/ sun key to toggle between the sunrise, sunset, and sun duration time city code sun rise icon & sun rise time for selected city sun set icon & sun set time for selected city sun duration icon & sun duration (in hours) for selected city 30 the al...

  • Page 9

    33 taking this into account, one can see how the weather has changed and is expected to change. For example, if the indicator is pointing downwards together with cloud and sun icons, then the last noticeable change in the weather was when it was sunny (the sun icon only). Therefore, the next change ...

  • Page 10

    37 toggling and resetting the min/max readings: 1. To toggle between the min/max data for indoor temperature and humidity and outdoor temperature press and release the min/max key. Once to show the max outdoor temperature data with the recorded time and date twice to show the min outdoor temperature...

  • Page 11

    41 to wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature sensor onto the bracket. Note: before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature reading ...

  • Page 12

    45 crosse technology, ltd authorized service center. La crosse technology, ltd will pay ground return shipping charges to the owner of the product to a usa address only. Your la crosse technology, ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1...

  • Page 13

    49 have both the indoor display unit and the outdoor transmitter (sensor) inside and five to six feet apart with nothing between them. Remove all power from both units. Press any one of the buttons on the display unit at least 20 times to clear all memory. Verify that the display is blank before pro...

  • Page 14

    53 wrong channel: the channel number is displayed in the lower right corner of your unit above the humidity reading. Use the ch/+ key to move this to channel 1. If this is set at channel 2 or 3, you may be getting no signal at all. Or, because of the popularity of our weather stations, it is possibl...

  • Page 15

    57 hour is incorrect. Minutes are correct. Unit “jumps” time. Time zone time zone setting may be incorrect. Please note north american time zones are negative numbers. -4 atlantic, -5 eastern, -6 central, -7 mountain, -8 pacific, -9 alaskan, -10 hawaiian. The dash preceding the number must be showin...

  • Page 16

    61 once the temperature is recorded, the weather station automatically displays the appropriate weather person icon as an indication of current weather and displays a suggestion for dressing accordingly. The icon will remain permanently visualized on the lcd once it registered a change in temperatur...

  • Page 17

    65 sensor and channel number indicator confirming the unit is reading your sensor because of the popularity of our weather stations, it is possible for your unit to pick up a signal from a neighbor’s sensor. To confirm that your sensor is the primary sensor after a proper restart, you can place your...