1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. WS-1611
  5. Operation Manual

La Crosse Technology WS-1611 Operation Manual

Manual is about: PROFESSIONAL WEATHER CENTER

Summary of WS-1611

  • Page 1

    Professional weather center ws-1611 operation manual 1 table of contents topic page features 3 setting up 6 function keys 12 lcd screen 15 manual setting 17 time alarm setting 25 weather alarm operations 26 hysteresis 32 weather forecast and weather tendency 33 wind direction and wind speed measurem...

  • Page 2

    4 • min/max value of outdoor temperature and humidity display with time & date of recording • low/high outdoor temperature and humidity alarm • relative air pressure displayed in inhg or hpa • air pressure tendency indicator for the past 12 hours (bargraph format) • lcd contrast selectable • low bat...

  • Page 3

    8 4. Afterwards, the weather center will start receiving data from the sensor. The outdoor temperature, humidity wind chill and wind speed should then be displayed on the weather center. If this does not happen after 30 seconds, the batteries will need to be removed from both units. You will have to...

  • Page 4

    12 hygro sensor at start-up and this code must be received and stored by the weather center in the first 30 seconds of power being supplied to it. Battery change: it is recommended to replace the batteries in all units every 24 months to ensure optimum accuracy of these units. Please participate in ...

  • Page 5

    16 air pressure histogram outdoor temperature in °f or ºc wind direction display and wind speed in beaufort scale calendar display weather tendency indicator time display time alarm icon outdoor relative humidity in % weather forecast icon relative air pressure display in inhg or hpa wind speed in m...

  • Page 6

    20 °f/°c temperature unit setting the temperature display can be selected to show temperature data in °f or °c. (default °f) 1. The temperature unit is flashing 2. Use the + or min/max key to toggle between “°f” or “°c”. Confirm with the set key and enter the wind speed unit setting wind speed unit ...

  • Page 7

    24 storm warning threshold value setting you may also define a switching sensitivity value for the storm warning display at a decrease of air pressure from .09 inhg to .27 inhg over 6 hours (default 0.15 inhg). 1. The sensitivity value will start flashing. 2. Use the + or min/max key to select the v...

  • Page 8

    28 default alarm values: low 32 °f temperature high 104 °f low 45% relative humidity high 70% wind speed high 62.0mph high and low outdoor temperature alarm setting note: the high and low outdoor temperature alarm can be set on/off independently, according to your needs. Set the outdoor temperature ...

  • Page 9

    32 4. Press the alarm key once to return to the normal display mode. In case the wind speed exceeds the condition for high wind speed alarm, the value will be flashing, along with the corresponding high alarm icon ("hi al"). And the buzzer will ring for 2 minutes. User may press any key to stop the ...

  • Page 10

    36 the horizontal axis represents the last 12 hours air pressure recording (-12, -9, -6, -3 and 0 hour). The bars are plotted at each of the 5 steps and give the trend over the recorded period. The scale on the right compares the result. The "0" in the middle of this scale determines the current air...

  • Page 11

    40 2. Press min/ max to view older records. (press min/max and + key to view "previous" and "next" record respectively. The records are made at 3-hour intervals) note: • the stored history records will not be retained after battery change or whenever battery is removed. • the total rainfall value wi...

  • Page 12

    44 8. Max relative pressure with the date and time of recording max icon max relative pressure value time and date or recording 45 9. Maximum wind speed reset the min/max weather data to reset the aforementioned min/max weather data 1. To 9., you shall need to reset each of the data independently. 1...

  • Page 13

    48 to re-enable the buzzer: 1. When the buzzer off icon is shown on lcd, press the set key shortly and the buzzer off icon will disappear. 2. Press alarm key once to return to the normal display mode. The "buzzer off" icon will no longer be shown. Then the alarm will sound normally. Low battery indi...

  • Page 14

    52 an ideal mounting place for the thermo-hygro sensor would be the outer wall beneath the extension of a roof, as this will protect the sensor from direct sunlight and other extreme weather conditions. To wall mount, use the 2 screws to affix the wall bracket to the desired wall, plug in the thermo...

  • Page 15

    56 dimensions (l x w x h) weather center : 4.72" x 1.22" x 6.89" (120 x 31 x 175 mm) thermo-hygro sensor : 2.25" x 2.44" x 6.18" (57.3 x 62 x 156.9 mm) wind sensor : 9.84" x 5.74" x 10.87" (250 x 145.9 x 276.2 mm) rain sensor : 5.67" x 2.15" x 3.46" (144 x 54.6 x 88 mm) liability disclaimer • the el...

  • Page 16

    60 this handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged..