La Crosse Technology WS-1613-IT Operation Manual

Manual is about: Professional Weather Center

Summary of WS-1613-IT

  • Page 1

    Professional weather center ws-1613-it operation manual important: when a battery change is required on any of the units of this set, all units have to be reset and user must go through initial set-up steps again. 1 table of contents topic page features 3 setting up 6 function keys 12 lcd screen 14 ...

  • Page 2

    6 cable connection between the wind sensor and the thermo-hygro sensor cable connection between the rain sensor and the thermo-hygro sensor wireless transmission at 915 mhz - thermo- hygro sensor to the weather center weather center wind sensor rain sensor setting up: 7 note: when putting the weathe...

  • Page 3

    12 the bonus receiver use 2 x aa, iec lr6, 1.5v batteries. When the batteries need to be replaced, the low battery symbol will appear on the lcd. To install and replace the batteries, please follow the steps below: 1. Remove the battery compartment cover. 2. Insert the batteries observing the correc...

  • Page 4

    18 calendar setting: the date default of the weather center is 1. 1. Of year 2005. The date can be set manually by proceeding as follows. 1. The year digit starts flashing. 2. Use the + or min/max key to set the year. The range runs from "00" (2000) to "99" (2099). 3. Press the set key to confirm th...

  • Page 5

    24 2. Press and hold the set key for about 2 seconds. The hour digit of the alarm time will start flashing. Press the + or min/max key to set the hour of the alarm time. 3. Press the set key to confirm and advance to the minute setting. The minute digit will be flashing. 4. Press the + or min/max ke...

  • Page 6

    30 drops to +76.8°f (24.9 °c) or below and thereafter again increases to beyond +77°f (25 °c), the data will be blinking, but no alarm will be activated. It has to drop to below +75.2°f (24 °c) (with a pre-set hysteresis of 1.8°f (1°c)) so that the alarm can be produced again. Hysteresis values for ...

  • Page 7

    36 to view the weather history: 1. Press the history key. The latest weather record will be shown with the date and time of recording. The "history" icon will be displayed at the bottom of the lcd. 2. Press min/ max to view older records. (press min/max and + key to view "previous" and "next" record...

  • Page 8

    42 2. Press and hold the set key for about 2 seconds, then the "reset" icon will appear at the bottom part of the lcd. 3. Press the + key once, then the stored value will be reset to the current value and current time. 4. Press the alarm key to return to normal display mode. 10. Total rainfall amoun...

  • Page 9

    48 mounted using the screw or cable tie provided onto a solid wall/ panel mast or mast to allow the wind to travel around the sensor unhindered from all directions (ideal mast size should be from diameter about 5 / 8 ” (16 mm) to 1 1 / 4 ” (33 mm)). Once the wind sensor is fixed onto the mast, conne...

  • Page 10

    54 to wall mount: 1. Fix a screw (not supplied) into the desired wall, leaving the head extended out the by about 5mm. 2. Hang the bonus receiver onto the screw. Remember to ensure that it locks into place before releasing. Care and maintenance: • extreme temperatures, vibration and shock should be ...